Subject: OSH P-port mufflers
From: ACRE
Date: 8/7/2004, 3:34 AM


-- Kevin & Kim wrote:

Right.  I may be blowing a whole lot more than hot air here, but
here's
some
"out loud thinking."
A little overlap from my choir days at St. John's Cathedral in
Denver.
How about this:  A tuned exhaust borrowing from a pipe organ.  Sound
is
produced when laminar flow air flows through the foot of the pipe
and some
flows out the mouth (the hole in the front of the pipe). This causes
a
pressure differential which creates oscilations.
Reverse engineer this.  Exhaust pulses enters the foot, and a tuned
mouth
(a
NACA scoop?) would create negative pressure at the manifold.
7000rpm/60 = 117rps
117*6(rotor sides) = 700 Hz
700Hz @ a 160dB (guessing here now....)
Then baffles after the mouth to quiet the sound?
Standing waves may be a problem. Would there be a dead spot at
3500rpm
(350Hz)  If that's a problem, how do 2 stroke bikes get past that?
Is
there
a frequency where the tuned exhaust creates a standing wave that the
engine
must power through?
Anyway, flame away on this one..... I've got plenty more where this
came
from :-)
Kevin



Kevin you just explained the main idea behind tuned exhaust systems...
Hans Conser

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.