> Kevin & Kim wrote:
>
> Not sure if I asked this already,,,, This is a PC question with
airplane application.
> Does anodizing aluminum change the heat conduction property of
aluminum? Specifically, does an AL heat sink with an anodized surface
retain heat
more than
> the same with out hard surface annodization?
> Or, do different alloys of AL have different thermal
conductivity properties?
> Thanks.
> Kevin in Denver
Good question. A black surface radiates heat better than a silver
colored surface.
Paul Lamar
Paul,
Black anodize does radiate heat slightly better. Only when a thin
layer is used though. The use of more than about .0003-.0005 in.
insulates the transfer to a
draw. Lots of study was done for aircooled auto engines. Black body
radiation is a well studied fact. The problem is always with making a
thin enough coating
that still has a heat transfer in the same range as the base material.
Bill Jepson
-Dave Nieman wrote:
I just finished a infrared camera training coarse. Anything that is
shiny is a poor conductor of heat. All the show auto builders know
this... They make them shine but they can't get rid of the heat worth a
flip. All show and no go. Black will radiate heat better than a shinny
silver object. However it will do it even better if it is dull and or
not very smooth.
All objects have 3 characteristics. They reflect, transmit and emit
energy. A good reflector is a poor emitter or transmitter of heat
energy. A smooth shinny piece of aluminum for example would radiate heat
better if it was lightly sand blasted. A shiny surface works better as
a mirror (reflector) not a emitter or transmitter which is what you are
looking for when dissipating heat. You could paint it any dull color and
increase its ability to transfer heat. Or is you blast it you have no
worry of paint insulating the surface.
Dave Nieman
Kevin & Kim wrote:
Color does indeed make a world of difference with radiation emission and
absorption. But how about conduction? Does a hardend, anodized surface
reduce transfer of heat to surrounding air or other contacting materials?
If memory serves from my one mechanical engineering course, Elemental
Aluminum conducts heat more efficiently than Aluminum Oxide (by a tiny
amount and a fairly moot point living in an O2 rich environment...). But,
does the case hardening of anodizing inhibit or enhance conduction?
Theory 1: Unhardened, the AL deforms easier and the surface mates more
closely to another surface.
Theory 2: Unhardened, small rough surfaces hold tiny pockets of air which
act as microscopic insulators.
Theory 3: Hardened, the chemical change of the AL surface conducts heat less
readily.
Theory 4: Hardened, the surface allows molecules to pass freely, conducting
greater heat.
This all sprang from a conversation with a guy I work with. His re-built 55
Chevy runs a little hotter than he thinks it should. He's done everything
first class on that car and he put a copper radiator in it. I thought AL
was better, but he thinks AL will corrode faster. We got talking about
anodized AL radiators, inside and out, and this question came up. THEN, I
started having problems with my PC overheating and randomly shutting down.
It was time for a new processor heat sink and fan. I went un-anodized.
The ACRE connection? Apart from the obvious pool of brain power... Does
anyone have an anodized radiator? OR... can rotor housings be anodized to
protect them from pitting and corosion? If so, will that effect cooling?
Kevin in Denver
Corrosion on the rotor housing does not seem to be a serious problem.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.