Jerry Hey wrote:
Do fuel rails have to be straight? We are jumping through hoops trying
to get the injectors in a straight line? Jerry
You have to make a jig to do that Jerry. Here is what mine looks like.
Paul Lamar
I did it as shown on the pictures, but during welding they went out of
alignment. I cut them down and tried again. It was not much better.
Bulent
Who welded it? You got to clamp them down and tack here and there
all over the place so nothing gets too hot in one place.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.