Subject: single rotor and 4-rotor
From: ACRE
Date: 8/18/2004, 8:28 AM


the Aerota boys are Australian.  Remember that other Aussie Ralph Sarich who shook down the government for investments--first for rotaries, then two-strokes,
then air-assisted fuel injection--before absconding. I'll bet he's involved somehow with these flakes.  ds


I happen to know these particular flakes personally as I went over to Sydney to check them out :)

There are some home made four rotor engines around in Australia and NZ. One of them will
be at Seven Stock next month. There is also one built by an employee
of General Atomics Aviation Division (builder of the Predator UAV) here in San Diego.

Here are some pictures of that engine taken at Seven Stock last year.

Linden Blue (formerly CEO of Beechcraft) is the CEO and happens to be 
a rotor head. Several of the other engineers at GA AD are also rotor heads.
Jeff Spitzer Chief Engineer on the Predator once worked for Moller and
converted the one rotor air cooled OMC engine to a liquid cooled two rotor.

GA AD also built a scaled down version of the Junkers Jumo type aircraft 
diesel designed by Jeff and rejected it for production and use in a UAV.
The fuel consumption was not enough better to compensate for the extra weight.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.