What size hammer did you use? Try a ten pound sledge. did you put some

WD40

on there?

Paul Lamar

Bob Darrah wrote:

Jerry, try, while pulling with your puller, hitting on both sides of the
counterweight with two heavy hammers at the same time.  The tricky part is
to get both hammers to hit at the same instant.  But at this point, you have
a lot of time to practice.  But be careful, when it comes, it comes with
vengeance.  If you could leave the nut on loosely while you do this, it will
keep the counterweight contained.

Good luck!

Bob Darrah

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.