Subject: Now with turbo on manifolds
From: ACRE
Date: 8/22/2004, 4:53 PM


     Ernesto Sanchez wrote:
     >
     > I like the way the HKS cast iron manifold without the waste
gate
fits.
     > Clean!
     > Ernesto

Ben Baltrusaitis wrote:

I can't open the first pic.

Here it is again Ben.

Paul Lamar

Hi, Paul....I couldn't help but notice that in the last picture you
sent
"Now with turbo on manifolds", that the water pump looks very
different from
my 1989 13b turbo engine's water pump. It appears to have two holes
large
enough for thermostats.  Can you enlighten me regarding this water
pump? Did
it have two thermostats or ???? Thanks in advance.  Paul Conner

Yes the third gen water pump is vastly different than the 1989 2nd gen
pumps.
The impeller is sheet metal and it rotates in the opposite direction.
Yes it did have two thermostats.
I don't recommend thermostats. It is better to use cowl flaps to control
the
temperature of the engine coolant and oil as that will add about 5 MPH
to
the top speed and or give more MPG.

Paul Lamar


Ops I sent you the third gen pump. The Cosmo 13B pump is different.
Here is the 13B Cosmo pump.

Paul Lamar


OK....makes sense now....thought I was loosing it.  (My wife still insists
that I AM loosing it).  I'll stick with my simple 1989 water pump.  Paul
Conner

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.