Subject: Now with turbo on manifolds
From: ACRE
Date: 8/22/2004, 11:44 AM


     Ernesto Sanchez wrote:
     >
     > I like the way the HKS cast iron manifold without the waste gate
fits.
     > Clean!
     > Ernesto

Ben Baltrusaitis wrote:

I can't open the first pic.

Here it is again Ben.

Paul Lamar


Hi, Paul....I couldn't help but notice that in the last picture you sent
"Now with turbo on manifolds", that the water pump looks very different from
my 1989 13b turbo engine's water pump. It appears to have two holes large
enough for thermostats.  Can you enlighten me regarding this water pump? Did
it have two thermostats or ???? Thanks in advance.  Paul Conner

Yes the third gen water pump is vastly different than the 1989 2nd gen pumps.
The impeller is sheet metal and it rotates in the opposite direction.
Yes it did have two thermostats.
I don't recommend thermostats. It is better to use cowl flaps to control the 
temperature of the engine coolant and oil as that will add about 5 MPH to 
the top speed and or give more MPG.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.

3rd-gen-impeller.jpg

3rd-gen-pump2.jpg

3rd-gen-pump.jpg