Subject: drawing of rotor housing
From: ACRE
Date: 8/25/2004, 2:56 AM


Alex Madsen wrote:

Does anybody have a dimensioned drawing of the inside of a rotor
housing
(the area the seal slide on).

Alex Madsen

Its mathematically derived Alex.

Paul Lamar

-Alex Madsen wrote:

Thanks Paul, the math makes perfect sense.
Do you know what the value for e, a, R and theta-a is for the 13b?

After further inspection of the equations I realized that theta-a is a
variable not a constant.  So I am only looking for a, R, and e of the
13b.

Thanks
Alex Madsen

Now you are talking Alex.  

"e" is eccentricity of the eshaft. That is 15 mm. 

R is 105 mm. Equidistance is 4 mm whatever that is.

b = housing width is 80 mm

That is all I can find.

Incidentally Mazda made 239,000 rotary engines in 1973 with the same factory they
are using now.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.