Subject: jpg mp calibration adjustments
From: ACRE
Date: 8/30/2004, 11:45 PM


Seems that this might be something that needs addressing for those
of
you calibrating
the ground adjustments of a mp gauge used to check the engine's
performance.
Marc Wiese

Where did you get this Marc?

Paul Lamar

I got it from JPI instruments when I installed the EDM 800 engine
analyzer.

Marc Wiese

Ah so. That explains it. An electronic manifold pressure gage. To my
knowledge
there are no calibration procedures on mechanical manifold pressure
gages because
they are just measuring absolute pressure. I could be wrong.

Paul Lamar


Others are having great difficulty calibrating Tracy's em 2 mp readouts.
I figure most engine monitors will go electronic if they have fi. For
all I know even the Cessna absolute mechanical mp gauges (should) figure
some sort of adjustment in as they don't know their altitude? My mp
steam gauge does not correspond to the atis setting much.........and now
I know why.
Marc Wiese

In absolute pressure terms altitude has nothing to do with it. The absolute
pressure is what it is. When you set your altimeter to the ATIS right after 
the ATIS has been updated does it read the field elevation or not?

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.