Vance W Jaqua wrote:
Paul - After burrowing deeply into my messy files - I believe
that I have found the CD i question. I had opened the envelope
but I am pretty sure that I had not installed it. I viewed the
contents, and it does look fairly promising - it looks like
you can at least make an MPEG from the video. I could not
find a readme nor identify a n acrobat file that looked like
the manual you mentioned - but this was just a quick look
we will have to figure out the best way to get it into
your hands - Vance (the disorganized packrat)
Thanks Vance I will come out tomorrow and pick it up.
We went out to Agua Caliente strip yesterday and shot some stuff in late afternoon.
Lighting was not good. We stayed over night and shot some more at
6:15 AM right at sunrise. It is going to be wonderful.
I'll upload some short video clips we recorded with Robin's still
camera later today. (Yes it can do short video clips.) I want to warn you
we did it with the PT Cruiser and not the RX8 as Mikey came with
us and he is not comfortable in the RX8. However he never complains :)
The shot with Dave taking off behind the RX8 will be just spectacular
if we can get it timed right. The camera will be low on the center
line of the runway as I accelerate down the strip in the RX8 and Dave takes
off over me and keeps it at about 15 feet above the runway until
past the camera. We will try three different zooms with three
takeoffs and landings. Can you do that Dave?
In the mean time I'll try not running over your camera Vance.
I am going to write a QB program assuming
a constant thrust and gross weight for Dave's airplane and based on
the measured acceleration of the RX8. What speed do you rotate at Dave?
I think Dave needs to delay taking off after
me for a second or two. We will get a better handle on that shortly.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.