Subject: Noise measurement data (follow up topic "Mufflerless 20B")
From: ACRE
Date: 9/7/2004, 6:00 AM


-Haiye Lou wrote:

Dear Paul and Dave

Thanks for the information.

I will be pleased to have a look the test data on line from
here, Europe, when you fly, Dave.
Is there also frequency spectrum from that noise mornitoring
system? I am going to do some research about the noise related to
rotary engine. It will be very interesting!
I have a small PC based LPT plug system can do the similar
thing for online publication or email alert with sound pressure
level, spectrum, rpm, temp etc., but I did not get a chance to
make a flight yet. It is pity that we are far from each other
otherwise I will come to you :)

Looking forward to hearing from you on the test.

Best regards

Haiye Lou-

No frequency data.  Just decibel level.  I can tell you that my
frequency is
higher than any  reciprocating engine on the field.

Dave Leonard


Speaking of frequency data I had my prop balanced today and that was quite
an interesting event.  The frequencies are all very predictable.  At 4800
engine rpm the exhaust pulse (this is what is vibrating my engine the most
(.7 in), with a freq. of 9600.  The prop is 4800/2.17.  There were ground
effect harmonics, and a moderate "8th" harmonic that he didn't know what it
was coming from.  Then there was the engine (e-shaft/rotor) vibration that
was not zero, right at 4800 RPM.

>From the ground you will hear the 9600 exhaust with the prop background.

Dave Leonard

"Then there was the engine (e-shaft/rotor) vibration that  was not zero, 
right at 4800 RPM."

Was this engine ever rebuilt Dave? Perhaps some one used the wrong rotor
weight / balance weight combination.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.