Ben, I must admit that I have the opposite experience
from
Tom.
I am running a 13B with a turbo (stock) and no
muffler. It
is
loud! Everyone remarks that they can hear me coming
long
before
they see me. Everyone always knows when I am taking
off, and
the
wife doesn't like it because it is too loud.
I will sometimes press people and say "Isn't it just a
different
sound, and not really any louder?" Most will humor me
and agree.
I am currently experimenting with a race muffler to
take to
bite
off.
Dave Leonard
Haiye Lou wrote:
Hi all,
It is an interesting topic.
I have some questions:
-Does any one has (or where I can find) noise
measurement data
with frequency spectrum from rotary engine?
-According to your experience, for the engine and the
propeller, which one contribute more noise?
-How is the noise from RX-7 or RX-8? (I did not have
chance to
hear these two types of cars) Any data available?
Best regards
Haiye Lou
I don't have the frequency spectrum but I can tell you the
13B
fires
twice per revolution so the main pulse rate is 200 Hz at
6000
RPM. A
4 cyl aircraft engine would be less
than half this.
I have taken some noise measurements on different NA 13B
powered airplanes from about 10 meters away perpendicular
and they range
98
to 103 db. Hard to tell the percentage
of prop noise from engine noise however.
Paul Lamar
My home field, MYF, has a noise abatement system. It is a
series
of
sensors in the local area that record the noise level and
time.
If a
noise violation is noted they will listen to the ATC tapes
and
figure
out who did it so they can issue warnings and fines for
repeat offenders. The cool thing is that the read-out is on
public
display.
All I need is someone to watch the display while I do a
normal
take
off. The typical sound levels for several different type
aircraft
are
also on display.
Will let you know when I get around to it.
Dave Leonard
Turbo 13b RV-6 with no muffler.
-Haiye Lou wrote:
Dear Paul and Dave
Thanks for the information.
I will be pleased to have a look the test data on line from
here, Europe, when you fly, Dave.
Is there also frequency spectrum from that noise mornitoring
system? I am going to do some research about the noise related
to rotary engine. It will be very interesting!
I have a small PC based LPT plug system can do the similar
thing for online publication or email alert with sound pressure
level, spectrum, rpm, temp etc., but I did not get a chance to
make a flight yet. It is pity that we are far from each other
otherwise I will come to you :)
Looking forward to hearing from you on the test.
Best regards
Haiye Lou-
No frequency data. Just decibel level. I can tell you that my
frequency is
higher than any reciprocating engine on the field.
Dave Leonard
Greetings Paul Et Al
Attached is a program called RPM from Sound in a self extracting zip
file called RPMSETUP.EXE. It is a rudimentary spectrum analyser and
frequency measuring program. It runs on a laptop computer by using its
built in, or an auxiliary microphone, and does a real time fast
Fourier analysis to locate and measure the amplitude and frequency of
sound waves. (The math complexity of this method leaves me open
mouthed in awe, and for such a relatively superficial
application.......Amazing.)
I suspect you might put it to good use for the muffler measurements.
It is freeware. At the very least, use it to calibrate your
tachometer.
Kind regards
Aden
Thanks Aden.
Paul Lamar
Haiye Lou wrote:
Hi Aden,
Unfortunately I can not receive EXE file from this POP server. Can you send it to me again to:
haiye.lou@bluewin.ch
Thanks
Haiye Lou
If you send it as a plain zip it will probably go through Aden.
I'll rename it RPMsetup.... Just add the . E X E at the end.
Try this.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.