-Haiye Lou wrote:
Dear Paul and Dave
Thanks for the information.
I will be pleased to have a look the test data on line from
here, Europe, when you fly, Dave.
Is there also frequency spectrum from that noise mornitoring
system? I am going to do some research about the noise related to
rotary engine. It will be very interesting!
I have a small PC based LPT plug system can do the similar
thing for online publication or email alert with sound pressure
level, spectrum, rpm, temp etc., but I did not get a chance to
make a flight yet. It is pity that we are far from each other
otherwise I will come to you :)
Looking forward to hearing from you on the test.
Best regards
Haiye Lou-
No frequency data. Just decibel level. I can tell you that my
frequency is
higher than any reciprocating engine on the field.
Dave Leonard
Speaking of frequency data I had my prop balanced today and that was quite
an interesting event. The frequencies are all very predictable. At 4800
engine rpm the exhaust pulse (this is what is vibrating my engine the most
(.7 in), with a freq. of 9600. The prop is 4800/2.17. There were ground
effect harmonics, and a moderate "8th" harmonic that he didn't know what it
was coming from. Then there was the engine (e-shaft/rotor) vibration that
was not zero, right at 4800 RPM.
>From the ground you will hear the 9600 exhaust with the prop background.
Dave Leonard
"Then there was the engine (e-shaft/rotor) vibration that was not zero,
right at 4800 RPM."
Was this engine ever rebuilt Dave? Perhaps some one used the wrong rotor
weight / balance weight combination.
Paul Lamar
I rebuilt the engine reusing all the same parts. There is an obviously an auto
tranny flywheel and counterweight that is supposed to go with the turbo '91 rotors,
but that could be inaccurate. Does anyone know if there are separate rear
counterweights for the turbo and n.a. versions?
Dave Leonard
The counter weights are built into the flywheels on the manual trannys.
You may have hit on something here Dave. I don't think the auto tranny was offered
with the 1991 Turbo II engine. I could be wrong. Also there may be different year auto tranny
counter weights.
Ah yes! It could be a 1986 to 1988 auto tranny rotor weight for the 10.04 pound
rotor and your 89-92 turbo engine has the 9.54 pound rotors.
You should order a counter weight for the 1989-1992 non turbo auto tranny engine.
Perhaps John or Dave Lemon can answer this question at Mazdatrix.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.