The NASA tests were done with the exhaust pipe centered at the entry point
of a larger augmentor tube. I think what matters is creating a boundary
layer between the high speed exhaust gases and the slow moving cooling air.
If I recall, NASA had their best results with a flatten tube where there was
better contact with the incoming cooling air. All of the Experimental
Aircraft exhaust augmentation implementations, that I know of, have been
very successful. They use a standard round exhaust tube within a larger
augmentor tube (not elliptical). The powersport powered Velocity, that was
at Oshkosh this year, is an example. With the proposed muffler design there
is much more boundary area where the exhaust gases meet the cooling air.
This should enhance the augmentation effect.
Basically, there are two kinds of augmentors - steady flow, which use
mainly entrainment and shear to transfer energy, and unsteady flow which
use slugs of primary-flow gas as "virtual pistons." Of the two, the
latter can be more compact and much more efficient, which explains why
early exhaust-ejector tests that used settling chambers to achieve a
quasi-steady primary flow gave abysmal augmentation factors. The later
NACA tests with the single-cylinder test engine were even more
confusing, because although they followed design rules appropriate to
steady-flow augmentors they got results more in keeping with the
pressure-exchange type. I'm still wrestling with this while preparing
the second book in the Ducted Fan Design series, which will be devoted
to cooling systems - trying to formulate design rules for unsteady-flow
ejectors. Most of my work has been on dimensional analysis, but I don't
seem to have hit on the right set of nondimensional parameters. Some
recent, completely unheralded work published online may hold the answer
to the dilemma by identifying one of the relevant parameters, and by
implication all the others. Film at eleven!
Marc de Piolenc
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.