Subject: Jerry's Throttle Bodies-Powersport butterflies
From: ACRE
Date: 9/14/2004, 12:43 PM


Fred Osborn wrote:

Paul,

Regarding Jerry's throttle bodies in the attached photo. They
are
installed with a vertical rotation axis. It seems to me that the
intake
air flow direction at idle would be strongly influenced by the
position
of the throttle plate. If the axis was horizontal the flow could
be
directed up or down into the opening combustion chamber to
effect
the
flow of the exhaust gas during the overlap time. Do we know what
direction the axis and the rotation has been in p-ports that
have
had a
better idle?

Fred Osborn

Its too late now but yes you are right. To answer your question I
don't
think
anybody investigate that.

Paul Lamar

Powersport did it right - the butterfly is horizontal.  Paul, this
msg
is from my computer at work - is the spacing fouled up?  All of
these
messages print correctly when I 'copy' myself.    Ken Powell

The spacing is good. The Power sport shaft is vertical.

Paul Lamar


Take a look at this photo - the butterfly is horizontal.
Ken Powell

Sure is but that is not the way they do it now.
Hard to do that without custom end and center housings.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.