Subject: Mazda Racing oil Cooler
From: ACRE
Date: 9/17/2004, 9:44 AM


     > << Paul, I would like to buy one of the Mazda Racing competition oil coolers.
     > I need to find someone who can help me here. Perhaps Lynn? I have talked to
     > several RX-7 SCCA racers that saw as much as
     >  > 15° F improvement in temps with just the cooler change. I was told that
     > the race cooler was the same size as the largest 13B single cooler, that was
     > nose mounted in the car. The technology is
     >  > supposed to be similar to the '86 cooler with internal turbolators in the
     > tubes. Expensive but effective. Those of you running cars please let me know
     > what you think. The size shouldn't be a problem
     >  > for me.
     >  > Bill Jepson

     > I have never owned one of those things but have seen many racers use them to
     > good effect when left under the radiator. I have three Setrabs that seem to
     > get the job done.
     >
     > Lynn E. Hanover

     Is that an RX8 body you are running Lynn?
     Do you have a picture of how the air exits the rad. Looks like they are right
     under the hood. I assume the sheet metal is cut away on the intake side.
     I hope Mazda Speed is giving you money :)

     Paul Lamar

Ben Baltrusaitis wrote:

Bill,
If size isn't a problem, here is the site to buy the oil cooler that is being run on the Formula Mazda:

http://store.yahoo.com/huffaker/cooisy.html

Ben

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.