Subject: Long EZ turbo RX8
From: ACRE
Date: 9/20/2004, 1:36 AM



Paul,
         I applaud you efforts to rotarize the Long EZ!  I was thinking of
someone who would take an existing Lycosaurus A/C and try to install a
rotary.  If a builder has not taken into account a wider firewall or a
canopy that starts to taper at it's mid point the resulting cowl could get
difficult.  I like the idea of a prop extension but I do not know if Tracy
has tested or designed for it.

Joe Berki
building F16 scoop

Joe I know you are into exhaust ejectors. A prop extension might make
them more practical.

Paul Lamar


Tracy Crook wrote:

 The RD-1A/B/C drives can handle prop extensions but not the original RD-1-.  Prop shaft is much stronger on the later gear drives.

Tracy

Thanks Tracy.

BTW  Here is a picture I took at Reno showing the latest in metal Formula One
prop extensions. These are so stiff in torsion they hardly affect the position 
of the torsional resonant null in the crankshaft. It is hollow of course.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.