-> Gary Palmer wrote:

Hi Brian,
       The system you describe is almost exactly like Perry Casson's Glastar installation. He has had no cooling problems whatsoever. A beautiful job, but you better be prepared to do a lot of
custom cowl fibreglass work. Check it out at http://eaa154.dhs.org/perry/engine/index.shtml

I had a lot of trouble with that web site with two different browser.

shtml gives the source on the html.

Can you capture the pictures of the left and right side of the engine
and up load them here Gary?

Paul Lamar

Hi Paul,

I update the web site to make it more friendly for the Mozilla based
browsers. You should be able to get there from here
<http://eaa154.dhs.org/perry/engine/index.html>

Perry Casson

Thanks Perry. Here another picture of your installation that Daniel Gagnon sent.
Nice job on your engine installation. Simple and to the point.

Note the oil rad mounted on the right side along side the rad core folks.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.