Bulent Aliev wrote:

Paul, I'm looking for an adapter for the turbo installation. Trying to
transition from 2" ID hose to 2.75 ID hose going into the throttle body.
Any ideas?
Bulent

That is a big jump. Why the 2 inch hose with a 2.75 inch TB?
You can make your own hose adapter out of silicone red rubber tape if you
first make a
male plug.

Thanks Paul. I'm getting sick of making things:) I wanted to buy one.
The turbo outlet is 2" and the throttle body I'm using has a 2.75 OD inlet.
I was told that some shops sell these adapters.
Bulent

Yea there is a magazine called RX Tuner. They have a lot of ads for turbo
stuff. It is published in your neck of the woods but you  need a subscription.

http://www.rxtuner.com/

BTW the OD of the turbo is more like 2.25 or 2.5 inches.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.