Rotors made from other material with a better strength to weight ratio than
cast iron may eventually be used. A more costly aluminum rotor is possible
with steel inserts in the high wear areas of the apex seal slots. A titanium
rotor is also possible. So too would be a sheet steel rotor perhaps laser
welded together
**** HI Paul, the way I see it, the apex seal has little or no relative movement
in the tip grooves, since the rotor tip tracks the rotor housing within a thou or
two. The same way piston rings have little relative movement in their grooves, and
they are usually steel rings in an aluminum piston. Has an alum alloy rotor ever
been tried?
That would be the best and most concise easily understood explanation of the
sresses in piston engines that I have ever read, I have forwarded it to a number
of rotary knockers already. Congratulations, Dave McC
Thanks Dave. It would be interesting to try a simple aluminum rotor.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.