Subject: Second gen auto TX flex plate wanted.
From: ACRE
Date: 9/30/2004, 3:54 PM


Ben Schneider wrote:

I need an second gen auto trans flywheel. Exactly what years of RX7 had
the 2nd gen? Further, what is the consensus on the light weight
flywheels
available from the aftermarket shops? good weight savings, not durable
enough? Thoughts?

  Thanks,

  Ben Schneider


I think the 2nd gen started around 1986 and went to 1992.
Check with Tracy Crook to find out what aluminum flywheels if any
are compatible his his gear box.

Paul Lamar

Ben and Paul,
 There are larger manual flywheels for some later models(same size as the
auto flexplate) so lightened steel or aluminium flywheels are available,
aftermarket.
Any of these should fit the bill.
George (down under)


But not all will fit Tracy's gear box.

Paul Lamar


Flywheels from 20B and 13B Cosmo don't fit Tracy's redrive, and you can not
replace them with other 13B flywheels. I have tried.
Bulent

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.