Flywheels from 20B and 13B Cosmo don't fit Tracy's redrive, and

you

can not

replace them with other 13B flywheels. I have tried.
Bulent

My 20B is equipped with a 2nd gen flywheel.   Fits just fine.  Maybe I

don't understand the problem.

Tracy  (finally got electricity back)

2nd gen flywheel or 2nd gen flex plate Tracy?

Paul Lamar

Marc Wiese wrote:

Since I'm going to use the 20B starter and the 20B auto tranny
bellhousing, I must use the 20B ring gear flex plate in order
that the teeth mesh with the starter. So I need some sort of adaptor and
a shaft extension (unless I somehow find a similar set up adaptable to
this-Mistral's would be nice but they have a custom bellhousing machined
for a cs prop oil delivery system and a starter arrangement similar to
Tracy's, I believe.
Marc W.

The coming GM starter/alternator is going to solve a lot of proplems
for us. It will require an electronic control no doubt like the RX8 altenator
uses.

Paul Lamar 

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.