Subject: TX flex plate to Tracy's redrive
From: ACRE
Date: 10/4/2004, 8:43 PM



     > >>>> Flywheels from 20B and 13B Cosmo don't fit Tracy's redrive, and you
     > >>> can not
     > >>>> replace them with other 13B flywheels. I have tried.
     > >>>> Bulent

     > >> My 20B is equipped with a 2nd gen flywheel.   Fits just fine.  Maybe I don't
     > >> understand the problem.
     > >>
     > >> Tracy  (finally got electricity back)

     > The problem is that I wanted to use the original starter. It straddles the
     > engine block and the bellhousing. So I could not use the 2nd gen flywheel.
     > The bellhousing gave me 3" "free" prop extension.
     > Bulent

Tracy Crook wrote:

     I think you will find that it is far from "free" before the project is complete.  I don't have any problem with builders doing their own thing but there is always a cost (usually
     high) with modifications to any existing system.

     Tracy  (watching runway disappear under the Suwannee river : )

Take pictures Tracy :)

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.