Brian,
That's exactly right. On my 20B using Tracy's re-drive, I replaced the
20B flex
plate with a 13B flex plate, using the 20B counterweight. If its out of
balance, you would never know it. It runs
as smooth as anyone could expect. Hope this helps some.
Mark S.
I want to also define our terms here. A flex plate is found on auto
TX's and a flywheels is found on manual TX's. Please don't confuse
the issue by using the term flywheel for flex plates or vice versa.
The first picture is a flexplate.
The second picture is a counter weight.
The third picture is a flywheel.
Paul
Mark,
That should be right, from what I've seen on the Auto flexplates, there are
usually a small tab welded on, which would indicate to me that the flexplate
is a balanced item in itself.
Therefore it's the counterweight which is the prime motor balancing
component.
George (down under)
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.