Andy Hecker wrote:
Glad it worked, Paul!
Here's the PDF I tried to build yesterday... Sigh... If all else fails,
reload...
Andy
When doing this sort of thing hit the shift print screen button.
That will capture the GUI application screen in the clip board.
Then run paint and hit edit "paste". That will load the captured
screen. Then use paint to mark the GUI buttons to hit. Save as
a jpg and send that. In the old days with the command line it
was much easier to explain how to use programs.
type this C:\"xxxx" and press return.
Paul Lamar
Thanks - I'll give that a shot. The 'historic' use of <shift-PrtScr> to
physically print is still stuck in my fingers somewhere. I used
<alt-PrtScr> and pasted into a Word doc, expecting to add the arrows and
'print' to a PDF. Apparently there was a minor snag somewhere when I
installed Acrobat reader 6 after installing my full copy of Acrobat 4 for
creating... So I 'punted' and saved as the MHT web page archive file.
Hmmmm...DOS days... Right up there with a Laurel and Hardy skit... "Type
'type'" "Type what?" "type" "right - I got it - type something - what?' No,
type TYPE...
Andy Hecker
You must admit "del" was faster than watching files fly through the air to the
trash bin :) I still use the command line frequently in Linux as it is much faster.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.