Subject: WMV Support RE: Rotary movies.
From: ACRE
Date: 10/7/2004, 2:34 PM


I have Nero and it won't handle wmv for editing as far as I can tell.
It will play wmv however.

Perhaps I am missing something. Give me a step by step using Nero
to convert the wmv to mpeg.

Paul Lamar

Here you are, Paul.  Step by step with Nero 6 in a Win2K Pro environment.

I'm on broadband if you want to e-mail the video clip.  I can also setup
FTP
access to my website if you want to upload it.

Andy Hecker

Thanks Andy that worked. The sound is OK. I had the volume turned down on
one
of the several series volume controls available. I cut the Piper takeoff
mpeg
in half as that is really the useful part of the video as far as sound is
concerned. The camera was apparently mounted on the wing and the wind noise
across the mic dominated the sound after the landing gear was retracted.

I'll ftp this to Bob if I can. If not I will mail it to him on a CD.

Paul Lamar

Glad it worked, Paul!

Here's the PDF I tried to build yesterday... Sigh... If all else fails,
reload...

Andy


When doing this sort of thing hit the shift print screen button.
That will capture the GUI application screen in the clip board.
Then run paint and hit edit "paste". That will load the captured
screen. Then use paint to mark the GUI buttons to hit. Save as
a jpg and send that. In the old days with the command line it 
was much easier to explain how to use programs.
type this C:\"xxxx" and press return.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.