Performance Data
A minor drawback of the use of ethanol fuel is the slightly reduced
range. A
liter of ethanol produces about two-thirds the heat of a liter of
avgas.
However, the effect of range loss is reduced by the higher
thermodynamic
efficiency of ethanol. A Cessna 152 fitted with a Lycoming 235N2C
engine
uses about 13.8 liters/100 km on avgas and 15.7 liters/100 km on
ethanol.
The high octane level of ethanol allows the use of higher compression
ratio
engines that deliver more power for the same throttle setting. The
lower
Reid vapor pressure of ethanol helps to prevent vapor locking.
Ethanol is
cooler and cleaner in use than avgas and is more resistant to
detonation,
resulting in fewer vibrations and longer engine life. "
Doug in Japan
But the alcohol ruins epoxy tanks in no time!
That is not a minor issue
Jerzy
Very good point Jerzy.
Paul Lamar
Brian Alley wrote:
Doug, Any composite tank should be coated internally
with Jeffco Novolac. Jeffco developed Novolac to coat
the inside of comercial tanks used to store acids and
alkyes. Nothing in any fuel will damage this coating.
=====
BRIAN ALLEY (N320WT)
CARBON FIBER COMPOSITES
304-872-7938 shop
304-562-6800 home
Brian,
Thanks for the info on Novolac. I haven't started on my wings yet and
will
wait to bio fuel testing is complete.
Aluminum and most rubbers don't like contact with ethanol either. Viton
or
telflon seals, and additives in the fuel solve this problem. Paint
around
the filler caps may be troublesome though.
Doug in Japan
Doug,
In 15 years of working with synthetic polymers, I know of no additive you
can add to fuel to negate the effect of alcohol. Let me know what you mean
and I'd be happy to research it. Other than using fluorinated polymers, I
know of no solution and as far as I know, there is no other approach used in
the automotive industry.
Charlie Smith
KIS Cruiser 4021
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.