Robert Clark - CAD/Graphics wrote:

Since you are the Rotary Conversion Expert, I am looking a 3D model of the 13B engine for use in planning and designing aircraft.



Robert Clark

CAD/Graphics Planner

KBR - Houston, Texas

What program are you using Robert so I can send you the aprropiate
file format. Also what excatly is this for? Who or what is KBR?


Paul Lamar

Chris Cowman wrote:

Hi Paul,

I too am looking for your 3D model of the 13B, 20B too if you have one.
We're getting ready to start modeling the FWF and it would be a great
help to start on your foundation.  We're using Vector Works and I think
that a DXF file would work fine.

Also, did you ever get that adapter casting for the remote water pump
made?  Can you send the DXF over for that too and we'll see about making
some if not.

Thanks again for all your help,

Chris Cosman 

In my experience DXf does not work for 3D. What 3D program are you using?
I am confused about the term "adapter casting for the remote water pump"

I have the casting pattern for the remote water pump housing.  I made some 
and sold all of the ones I made except a couple I kept for myself.

Are you referring to the part that bolts to the top of  block with in and out 
hose barbs? I never came up with a good drawing of that. A lot depends
on which way you want to run the hoses.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.