Subject: New Reno Racer design tri motor
From: ACRE
Date: 10/14/2004, 2:56 AM


Matt Prather wrote:

I am sure this is obvious, but we'll need to be sure to calculate
the wing area, planform, airfoil for pulling 2-4g's all the way
around the course.  Another place where lighter weight = better
performance. If the wing is too small for the load factor,
induced drag will rise.

Unlike the Pond Racer, but like other Rutan designs, maybe locate
the cockpit in the left nacelle behind one engine - left to make
it easier to see who you are passing.  That might dictate an
assymetric wing planform, but it would remove a bunch of
intersection drag associated with having a seperate cockpit.
Think single seat Boomerang...  It's more structurally efficient
as well.  If you are frightened by assymetry, locate the
radiators and electricals in the corresponding place in the right
nacelle.  Tailwheel(s).

MAP

I'll need both booms for cooling systems. I'll add those shortly.
The hole in the end of the boom will be the cooling air outlet.
Hopefully we will get a bit less cooling drag if not a slight
amount of thrust.

Paul Lamar


Okay, then how about 3 engines?  :)  One on the centerline as well
as the two outboard.  Then single tail surface...

MAP

Yea that's a good idea. A tri motor Reno racer. No replacement for
displacement! Compared to a Merlin or an R3350 three rotors are cheap.

Paul Lamar

Not only will we have as much HP as the unlimiteds but it will be lower
drag as well. Now all I need do is find space for the cooling systems :)
Yes I know the fuse has to be a tiny bit bigger here and there.
Also the cowls will be un symmetrical due to the intake and exhaust
systems.

Paul Lamar

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.

Heeheee...   I like it.  Would the prop arcs overlap?

Regards,

Matt-

No. I don't think it is a good idea.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.