James Bell sent me this web page.
This is from http://www.monito.com I think.
The Wankel Rotary Engine: Books, Papers, Articles
Books
Richard F. Ansdale, The Wankel RC Engine, A.S. Barnes & Co., South Brunswick &
New York, ISBN 0-498-0741-2,
LOC 69-18692, 1st American ed. 1969.
John Ball, Mazda RX-7: The First Generation, 1979-1985 Sept. 1990. Goldstar
Enterprises, ISBN 0929214048. 200+
pages hardcover, BW illustr.
Max Bentele, Engine Revolutions: The Autobiography of Max Bentele, 1991, ISBN
1-56091-081-X. SAE Order Num.
R-109, $19. Engineer with Curtiss-Wright 1956-1964.
Scott Corbett, What About the Wankel Engine? Four Winds Press, 1974. Dewey
TL210.7.C67. For Juvenile readers.
Harris Edward Dark, The Wankel Rotary Engine Indiana Univ. Press, ISBN
0-253-19021-5, LOC 73-16676, Dewey
629.2'504, June 1974.
Nicholas Faith, Wankel: The Story of the Revolutionary Rotary Engine Stein & Day,
Aug. 1975 0812817192.
Nicholas Faith, Wankel: The Curious Story behind the Revolutionary Rotary Engine
Allen and Unwin, London 1975.
ISBN 0046500014.
Paul Frère and Nino Vaccarella, The Targa Florio Route: Experts Meet the RX-7,
1989, D.R.H. Edition, Tokyo, Japan.
ISBN 4-7518-0072-8.
Karl E. Ludvigsen, Wankel Engines A to Z , Ludvigsen Publications, ISBN
0913646016.
John Matras, Illustrated Mazda Buyer's Guide . Motorbooks International, ISBN
0-87938-842-0, LOC 93-32133,
Dewey 629.222'2-dc20, 1994.
John Matras, Sports Car Color History: Mazda RX-7 . Motorbooks International,
1994. review
Jujiro Matsuda (1875-1952), Seventy Years of Factory Life . Autobiography of
founder of Mazda.
Jan P. Norbye, The Wankel Engine: Design, Development, Applications, Chilton Book
Co., Philadelphia, New York and
London, ISBN 0-8019-5591-2, 1st ed. Sep. 1971. Also Bailey Bros and Swinfen, ISBM
0561001375.
Kris Perkins, Norton's Rotaries Osprey Publishing, London, ISBN 1855321-81-5,
1991.
Ted Pipe, Principles of the Wankel Engine Bobs-Merrill Co. Oct. 1974, ISBN
0672210835.
Toyo Kogyo Co. History of Research and Development on Mazda Rotary Engine Toyo
Kogyo Co., Ltd., Hiroshima,
1972.
Jack K. Yamaguchi, RX-7, The New Mazda RX-7 and Mazda Rotary Engine Sports Cars,
St. Martin's Press, LOC
85-62339, 1st ed. 1985. ISBN 0312694563.
Jack K. Yamaguchi, RX-7, Mazda's Legendary Sports Car: Plus Racing and Winning -
Le Mans and IMSA GTO -
1991, ISBN 4-947659-01-7. 1992.
Toyo Kogyo Rotary Engine, Toyo Kogyo, Hiroshima, booklet, 1971.
Kenichi Yamamoto, Rotary Engine, Sankaido Co. Ltd. 1st ed. 1981. [republication
of 71 booklet or of some 69 edition?]
Society of Automotive Engineers Technical Papers
S-236
R.T. Hurley, "Rotating Combustion Engine", March 1960.
Trans. V. 69, p. 194
M. Bentele, "Curtiss-Wright's Developments on Rotating Combustion Engines", 1961.
Trans. V. 69, p. 641-649
R.T. Hurley and M. Bentele, "Rotating Combustion Engine", 1961.
S-288-A
W.G. Froede, "The NSU-Wankel Rotating Combustion Engine", Jan. 1961.
S-348
M. Bentele, "Further Developments in Rotating Combustion Engines at
Curtiss-Wright", March 1962.
886-D
C. Jones, "The Curtiss-Wright Rotating Combustion Engine Today", Aug. 1964.
650722
W.G. Froede, "The Rotary Engine of the NSU Spider", Oct. 1965.
Trans. V. 74
C. Jones, "New Rotating Combustion Powerplant Developments", 1965.
670194
C. Jones, "The Rotating Combustion Engine - Compact Lightweight Power for
Aircraft", Nov. 1966.
680461
W.G. Froede, "NSU's Double Bank Production Rotary Engine", May 1968.
Trans. V. 76 N. 5
C. Jones, "Rotary Combustion Engine is as Neat and Trim as the Aircraft Turbine",
May 1968.
680752
H. Keller, "Small Wankel Engines", Sept. 1968.
700074
D.E. Cole and C. Jones, "Reduction of Emissions from the Curtiss-Wright Rotary
Combustion Engine with an Exhaust
Reactor", Jan. 1970.
700079
K. Yamamoto and T. Kuroda, "Toyo Kogyo's Research and Development on Major Rotary
Engine Problems", Jan. 1970.
700273
W.T. Figart, R.L. Leisenring, and W.B. Silvestri, "The RC Engine - A New Approach
to Reduce Costs", April 1970.
1970 IME Paper
F. Feller, "The 2-Stage Rotary Engine - A New Concept in Diesel Power", Jan.
1971.
710581
K. Yamamoto and H. Tado, "The Rotary Engines of Yanmar Outboard Motors", June
1971.
710582
C. Jones and H. Lamping, "Curtiss-Wright's Development Status of the Stratified
Charge Rotating Combustion
Engine", June 1971.
720466
K. Yamamoto and T. Kuroda, "Improvements of the Rotary Engine with Charge Cooled
Rotor", May 1972.
720467
T.W. Rogers, W. Lemke, J. Lefevre, and T. Ohzawa, "Lubrication Studies in Rotary
Combustion Engines", May 1972.
720468
C. Jones, "A Survey of Curtiss-Wright's 1958-1971 Rotating Combustion Engine
Technological Developments", May
1972.
SAE
Kenichi Yamamoto, "Rotary Engine", June 1981 ISBN 9997341171.
840460
Charles Jones, "Advanced Development of Rotary Stratified Charge 750 and 1500 HP
Military Multi-Fuel Engines at
Curtiss-Wright", SAE Int. Congr. and Expo., Detroit, Feb. 27 - March 2, 1984.
850034
R. Sierens and W. Verdonck, "Development of a Natural Gas Stratified Charge
Rotary Engine", SAE Int. Cong. and
Expo, Detroit, Feb. 25 - Mar. 1, 1985, 13 pp. Audi NSU engine tested by Univ. of
Gent (Ghent?).
860563
T.N. Chen, R.N. Alford, and S.S. Kim, "Detonation Characteristics of Industrial
Natural Gas Rotary Engines", SAE Int.
Congr. and Expo., Detroit MI, Feb. 24, 1986. Describes Ingersoll-Rand IR-2500
engine.
860615
T.I-P. Shih, Song-Lin (Jason) Yang and Harold .J. Schock Jr., "A Two-Dimensional
Numerical Study of the Flow
Inside the Combustion Chamber of a Motored Rotary Engine". 1986.
870448
Steven R. King, "Durability of Natural Gas Fueled Rotary Engines", SAE Int. Cong.
and Expo. Detroit, Feb. 23, 1987.
SAE
Rotary Engine Design, 1989, ISBN 0-89883-695-6. Partial contents include Noise
and Vibration Reduction
Technology for REs, Combustion Model for Homogeneous Charge Natural Gas REs,
Engineering Study of Rotary-Vee
Engine Concept, and Strain Measurements in a RE Housing. SAE Order Number SP-768,
Price $42 ($35 member).
SAE Int. Cong. and Expo., Detroit, Feb. 27 - Mar. 3, 1989.
890671
J. Abraham and F.V. Bracco, "Comparison of Computed and Measured Pressure in a
Premixed-Charge Natural Gas
Fueled Rotary Engine", SAE Int. Cong. and Expo., Detroit, Feb. 27 - Mar. 3, 1989.
910893
F. Hamady, T. Stuecken, and H. Schock, "Experimental Analysis of Blowby and Flow
Field Interaction in a Motored
Rotary Engine", Feb 1991, appears in SAE Transactions, V. 100, Journal of
Engines, Section 3, pp. 1416-1442.
Feb. 1991
T. Morita, F. Hamady, T. Stuecken, Craig W. Somerton, and H. Schock, "Fuel Air
Mixing Visualization in a Motored
Rotary Engine Assembly", SAE International Congress and Exposition, Feb. 1991.
920302
Kenji Morimoto, Takafumi Teramoto, and Yuji Takamori, "Combustion Characteristics
in Hydrogen Fueled Rotary
Engine".
920309
Ritsuharu Shimizu, Tomoo Tadokoro, Toru Nakanishi, and Junichi Funamoto, "Mazda
4-Rotor Rotary Engine for the
Le Mans 24-Hour Endurance Race".
SP-1108
, 1992, Passenger Car Engine Lubricants, ISBN 1-56091-303-7, $55 (member $45).
Paper on "The Development of
Lubricating Oils for Rotary Racing Engines".
950093
Development of a unique fuel flexible engine, Part I: Engine design and physical
model
950449
Rotor shaft bearing analysis for selected Rand CamsT engine configurations
950452
High speed electronic fuel injection for direct injected rotary engine (also in
SP-1108).
950453
"A review and thermodynamic analysis of a rotary-vee internal combustion engine".
950454
"The characteristics of fuel consumption and exhaust emissions of the side
exhaust port rotary engine" (also in
SP-1108).
951769
"Wankel engine for hybrid powertrain" (also contained in Proceedings of 1995
Small Engine Technology Conference,
ISBN 56091-673-7, $99 ($79 member) SAE Order Num. P-292).
SP-1108
1995, Futuristic Concepts in Engines and Components, ISBN 1-56091-679-6, $55
(member $44). Papers on "High
Speed Electronic Fuel Injection for Direct Injected Rotary Engine" and "The
Characteristics of Fuel Consumption and
Exhaust Emissions of the Side Exhaust Port Rotary Engine".
960232
Paul A Salanki, James S. Wallace, (University of Toronto), "Evaluation of the
Hydrogen-Fueled Rotary Engine for
Hybrid Vehicle Applications".
The SAE has a home page which completely supercedes a dull previous page.
Other Technical Papers
J. Abraham and V. Magi, "Effects of Ignition Cavity Flows on the Performance of a
Stratified Charge Rotary Engine:
Initial 3-D Predictions", University of Minnesota Supercomputer Institute
Research Report UMSI 93/262, Dec. 1993,
submitted for publication.
Othmar Baier, [A mathematical treatment of the RCE], VDI report No. 45, 1960.
C. DellaCorte, H.E. Sliney, and M.S. Bogdanski, "Tribological [gloss] and
Mechanical Comparison of Sintered and
HIPped PM212: High Temperature Self-Lubricating Composites, Lubr. Eng. v 48, Nov.
1993, pp 877-885 (Also NASA
TM-105379). (Soc. Trib. and Lubr. Eng. best paper award 1994).
L. Dodge, D. Naegeli, "Hydrogen-air mixing evaluation in reciprocating engines",
NREL/TP--425-6346. 1994-06-01.
S.R. King, "Endurance Testing of a Natural Gas-Fueled Rotary Engine, Final Report
March 1985-January 1987", Gas
Research Institute, Chicago, GRI-87/0050; PB87-215703. [20,000 hours].
T.A. Kuchnicki, "Gas Rotary Engine Technology Development, Final Report
April-December 1990", Southwest
Research Institute, San Antonio, Texas, for Gas Research Institute, Chicago,
GRI-91/0096; NTIS# PB91-182402. [oil
cooled].
J.R. Mack, "Development of Natural Gas Rotary Engines: Final Report June 1986 -
June 1991", Gas Research Institute,
Chicago, GR191-0290; PB92-129665. [John Deere].
Paul S. Moller, "Evaluation of Thermal Barrier and PS-200 Self-Lubricating
Coatings in an Air-Cooled Rotary
Engine", Mar. 1995, LEW-15356, NASA Lewis Research Center, Cleveland, Ohio 44135.
A. Nagao, H. Ohzeki, and Y. Niura, "Present Status and Future View of Rotary
Engines", in Automotive Engine
Alternatives, edited by Robert L. Evans, Plenum Press, New York, 1987, pp.
183-202.
J.W. Walker and R.E. Mount, "The Stratified Charge Rotary Engine", in Automotive
Engine Alternatives, edited by
Robert L. Evans, Plenum Press, New York, 1987, pp. 203-218. [turbocharged].
Film and Video
"The NSU/Wankel engine - the principle" IWF 1968, NSU Auto Union AG (Neckarsulm), 16
mm film, 6 1/2 minutes.
Patents
Classifications:
Rotary
Class 409, Subclass 142: Means to mill epitrochoidal shape.
Engine: 415
Exhaust Reactor Separator: 60/902*
Exhaust Treatment: 60/901*
Plural Rigidly Related Blade: 415/198.1+
Plural Rigidly Related Blade Sets: 415/198.1+
Expansible Chamber Devices: 418
Piston Engine: 123/200
Rotor
Motor: 60
Internal Combustion: 123
Rotary Expansible Chamber: 418
Wankel Engine: 418/61.2
5,423,298
Rotary Internal Combustion Engine
5,433,176
Rotary-Reciprocal Combustion Engine
5,433,179
Rotary Engine with Variable Compression
5,441,018
Internal combustion rotary piston engine
4,728,488
Carbide / Flouride / Silver Self-Lubricating Composites [for housings]
Folio copy 03/26/98 at 11:32
EI/Compendex / Find THESAURUS ROTARY COMBUSTION ENGINES and SINCE 1/1/93
142 Brief citations
1) Rajan, Sun et al. "Influence of ethanol addition on the combustion and
emission characteristics of a two-rotor Wankel engine"
Proceedings of the 1997 Spring Technical Conference of the ASME Internal
Combustion Engine Division, Fort Collins, CO. USA. Advanced Engine Design
American Society of Mechanical Engineers, Internal Combustion Engine
Division (Publication) ICE v 3 1997. ASME, New York, NY, USA. p 49-53.
2) Anon (Ed.) "Proceedings of the Future Transportation Technology Conference
and Exposition"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAE Special Publications n 1108 1995. SAE, Warrendale, PA,
USA. 188p.
Shimizu, Ritsuharu et al. "Characteristics of fuel consumption and exhaust
emissions of the side exhaust port rotary engine"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAE Special Publications n 1108 1995. SAE, Warrendale, PA,
USA. p 181-188 950454.
ai ey, Stephen G. et al. "Review and thermodynamic analysis of a
rotary-vee internal combustion engine"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAE Special Publications n 1108 1995. SAE, Warrendale, PA,
USA. p 167-180 950453.
5) Meyer, Andrew E. et al. "High speed electronic fuel injection for direct
injected rotary engine"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAE Special Publications n 1108 1995. SAE, Warrendale, PA,
USA. p 153-165 950452.
6) Peng, L.X. et al. "Development of a unique fuel flexible engine Part II~-~--~
Thermodynamic model analysis"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAB Special Publications n 1108 1995. SAB, Warrendale, PA,
USA. p 111-118 950096.
7) Peng, L.X. et al. "Development of a unique fuel flexible engine Part I.
Engine design and physical model"
Proceedings of the Future Transportation Technology Conference and
Exposition, Costa Mesa, CA, USA. Futuristic Concepts in Engines and
Components SAE Special Publications n 1108 1995. SAE, Warrendale, PA,
USA. p 85-90 950093.
8) O'Connor, Leo "Reciprocating rotating-block engine"
MECHANICAL ENGINEERING. Mechanical Engineering v 117 n 6 Jun 1995. p
70-71.
9) Anon "Rotary engine makes a high power comeback"
DESIGN ENGINEERING (LONDON). Design Engineering (London) Mar 1995. p
25-26.
10) Hamai, Yuji et al. "Two-dimensional computer simulation of a low pressure
direct injection stratified charge rotary engine (Cycle-to-cycle
variation of air-fuel mixture distribution)"
NIPPON KIKAI GAKKAI RONBUNSHIJ, B HEN/TRANSACTIONS OF THE JAPAN SOCIETY
OF MECHANICAL ENGINEERS, PART B. Nippon Kikai Gakkai Ronbunshu, B
Hen/Transactions of the Japan Society of Mechanical Engineers, Part B v
60 n 579 Nov 1994. p 3900-3907.
11) Vargas, Jose V.C. et al. "Analysis of a cylindroids rotary engine"
Proceedings of the 16th Annual Fall Technical Conference on the Internal
Combustion Engine Division, ASME, Lafayette, IN, USA. Heavy Duty Engines
A Look at the Future American Society of Mechanical Engineers, Internal
Combustion Engine Division (Publication) ICE 22 1994. ASME, New York,
NY, USA. p 215-229.
12) Shih, A.J. "Kinematics of the cycloidal internal combustion engine
mechanism"
JOURNAL OF MECHANICAL DESIGN, TRANSACTIONS OF THE ASME. Journal of
Mechanical Design, Transactions Of the ASME v 115 n 4 Dec 1993. p
953-959.
13) Abraham, J. et al. "3-D computations of premixed-charge natural gas
combustion in rotary engines."
SAE (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAE Trans v 100 n
Sect 3 1991, 910625 p 910-922. l-56091-274-X.
14) Anon (Ed. ) "International Congress and Exposition."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series 1991. Publ by SAB, Warrendale, PA, USA. var paging.
15) Preston, Charles S. et al. "Closed cycle, high-altitude rotary engine for
unmanned ozone sampler."
Future Transportation Technology Conference and Exposition, Costa Mesa,
CA, USA. SAE Technical Paper Series. Pubi by SAE, Warrendale, PA, USA,
921548. p 1-7.
16) Willis, Edward A. et al. "NASA's Rotary Engine Technology Enablement
Program. 1983 Through 1991."
International Congress and Exposition, Detroit, MI, USA. SAB Technical
Paper Series. Publ by SAB, Warrendale, PA, USA, 920311. p 1-11.
17) Jones, Charles "Stratified charge rotary engine developments at JDTI from
1984 to 1991."
International Congress and Exposition, Detroit, MI, USA. SAB Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920310. p 1-10.
18) Shimizu, Ritsuharu et al. "Mazda 4-rotor rotary engine for the Le Mans
24-hour endurance race."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Pubi by SAE, Warrendale, PA, USA, 920309. p 1-10.
19) Dimpelfeld, Philip M. et al. "Design and testing of a natural gas fueled
5.8 liter rotary engine."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920307. p 1-9.
20) Abraham, J. et al. "3-D computations to improve combustion in a
stratified-charge rotary engine. Part III. Improved ignition
strategies."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920304. p 1-10.
21) Raju, M. S. "Heat transfer and performance characteristics of a
dual-ignition Wankel engine."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920303. p 1-43.
22) Morimoto, Kenji et al. "Combustion characteristics in hydrogen fueled
rotary engine."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920302. p 1-7.
23) Bartrand, Timothy A. et al. "Rotary engine performance limits predicted by
a zero-dimensional model."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAE, Warrendale, PA, USA, 920301. p 1-17.
24) DeFilippis, M. et al. "Effects of pocket configuration on the flow field
in a rotary engine assembly."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Pubi by SAB, Warrendale, PA, USA, 920300. p 1-15.
25) Kim, Kyu-Jung et al. "Performance simulation for spark ignition wankel
rotary engine."
Proceedings of the 6th International Pacific Conference on Automotive
Engineering. Proc 6 Int Pac Conf Autom Eng. Publ by Korea Soc of
Automotive Engineers, Inc, 1638-3, Socho-dong, Seoul, South Korea. p
237-245.
26) Hamady, F. et al. "Experimental analysis of blowby and flow field
interaction in a motored rotary engine."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAB, Warrendale, PA, USA, 910893. 27p.
27) Revankar, G. S. "Development of a stratified charge rotary engine apex
seal material."
International Congress and Exposition, Detroit, MI, USA. SAB Technical
Paper Series. Publ by SAB, Warrendale, PA, USA, 910627. 16p.
28) Rachel, T. et al. "Analysis of frictional power losses associated with the
side and apex seals of a Wankel rotary engine."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAB, Warrendale, PA, USA, 910626. lop.
29) Abraham, J. et al. "3-D computations of premixed-charge natural gas
combustion in rotary engines."
International Congress and Exposition, Detroit, MI, USA. SAE Technical
Paper Series. Publ by SAB, Warrendale, PA, USA, 910625. 13p.
30) Hamai, Yuji et al. "Two-dimensional computer simulation of unsteady flow
field inside a rotary engine."
3rd Triennial International Symposium on Fluid Control, Measurement, and
Visualization - FLUCOME ?91, San Francisco, CA, USA. Flucome ?91 3
Trienn Int Symp Fluid Control Meas Visualization Flucome 91. Publ by
ASME, New York, NY, USA. p 223-230.
31) Griffith, Mike et al. "Rotary engine powered ducted fan for aircraft
applications."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAB Trans v 99 n
Sect 3 1990. Publ by SAB, Warrendale, PA, USA, 1990 p 241-248.
32) Matsuda, Ikuo et al. "New technology employed for the latest 13B-rotary
engine."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAB Trans v 99 n
Sect 3 1990. Publ by SAB, Warrendale, PA, USA, 1990 p 230-240.
33) Eiermann, Dankwart et al. "Introduction of a new ultra-lite multipurpose
Wankel engine."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAB Trans v 99 n
Sect 3 1990. Publ by SAB, Warrendale, PA, USA, 1990 p 218-229.
34) Osumi, Toshihiko et al. "Prediction of power output performance of the
rotary engine by gas exchange process simulation."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAE Trans v 99 n
Sect 3 1990. Pubi by SAB, Warrendale, PA, USA, 1990 p 208-217.
35) Chouinard, E. et al. "Airflow visualization and LDV measurements in a
motored rotary engine assembly part 2. LDV measurements."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAE Trans v 99 n
Sect 3 1990. Publ by SAB, Warrendale, PA, USA, 1990 p 184-207.
36) Hamady, F. et al. "Airflow visualization and LDV measurements in a motored
rotary engine assembly part 1. Flow visualization."
SAB (SOCIETY OF AUTOMOTIVE ENGINEERS) TRANSACTIONS. SAB Trans v 99 n
Sect 3 1990. Publ by SAB, Warrendale, PA, USA, 1990 p 163-183.
37) Matsuura, Kenji et al. "Measurement and theoretical analysis of the
under-seal pressure of rotary engine apex seals."
NIPPON KIKAI GAKKAI RONBUNSHU, B HEN/TRANSACTIONS OF THE JAPAN SOCIETY
OF MECHANICAL ENGINEERS, PART B. Nippon Kikai Gakkai Ronbunshu B Hen v
57 n 540 Aug 1991 p 2845-2853.
38) Hamai, Yuji et al. "Two-dimensional computer simulation of unsteady flow
during the intake-compression stroke of a rotary engine."
NIPPON KIKAT GAKKAI RONBUNSHU, B HEN/TRANSACTIONS OF THE JAPAN SOCIETY
OF MECHANICAL ENGINEERS, PART B. Nippon Kikai Gakkai Ronbunshu B Hen v
57 n 539 Jul 1991 p 2293-2300.
39) Muroki, Takumi et al. "Study of an outline of combustion for a Direct
Injection Stratified-Charge Rotary Engine."
International Off-Highway and Powerplant Congress and Exposition,
Milwaukee, WI, USA. SAB Technical Paper Series. Publ by SAB, Warrendale,
PA, USA, 901600. llp.
40) Matsuura, Kenji et al. "Measurement of the relative behavior of a rotary
engine apex seal to the side of a slot using magnetic induction."
NIPPON KIKAI GAKKAI RONBUNSHtJ, B HEN/TRANSACTIONS OF THE JAPAN SOCIETY
OF MECHANICAL ENGINEERS, PART B. Nippon Kikai Gakkai Ronbunshu B Hen v
56 n 526 Jun 1990 p 1812-1817.
41) Osumi, Toshihiko et al. "Prediction of power output performance of the
rotary engine by gas exchange process simulation."
NIPPON KIKAI GAKKAI RONBUNSHU, B HEN/TRANSACTIONS OF THE JAPAN SOCIETY
OF MECHANICAL ENGINEERS, PART B. Nippon Kikai Gakkai Ronbunshu B Hen v
56 n 523 Mar 1990 p 858-861.
42) Griffith, Mike et al. "Rotary engine powered ducted fan for aircraft
applications."
SAB International Congress and Exposition, Detroit, MI, USA. SAB
Technical Paper Series. Publ by SAB, Warrendale, PA, USA. 8p 900037.
43) Matsuda, Ikuo et al. "New technology employed for the latest 13B-rotary
engine."
SAB International Congress and Exposition, Detroit, MI, USA. SAB
Technical Paper Series. Publ by SAB, Warrendale, PA, USA. llp 900036.
44) Osumi, Toshihiko et al. "Prediction of power output performance of the
rotary engine by gas exchange process simulation."
SAB International Congress and Exposition, Detroit, MI, USA. SAB
Technical Paper Series. Publ by SAB, Warrendale, PA, USA. lOp 900032.
45) Chouinard, E. et al. "Airflow visualization and LDV measurements in a
motored rotary engine assembly. Part 2. LDV measurements."
SAB International Congress and Exposition, Detroit, MI, USA. SAB
Technical Paper Series. Publ by SAB, Warrendale, PA, USA. 24p 900031.
46) Hamady, F. et al. "Airflow visualization and LDV measurements in a motored
rotary engine assembly. Part 1. Flow visualization."
SAB International Congress and Exposition, Detroit, MI, USA. SAB
Technical Paper Series. Publ by SAE, Warrendale, PA, USA. 21p 900030.
47) Maiti, R. et al. "Limits on modification of epitrochoid used in rotary
piston machines and the effects of modification on geometric volume
displacement and ripple."
INGENIEUR-ARCHIV. Ing Arch v 60 n 3 1990 p 183-194.
48) Walker, James W. et al. "STRATIFIED CHARGE ROTARY ENGINE."
Automotive Engine Alternatives, Proceedings of the International
Symposium on Alternative and Advanced Automotive Engines., Vancouver,
BC, CAn. Publ by Plenum Press, New York, NY, USA p 203-218.
49) Nagao, Akihito et al. "PRESENT STATUS AND FUTURE VIEW OF ROTARY ENGINES."
Automotive Engine Alternatives, Proceedings of the International
Symposium on Alternative and Advanced Automotive Engines., Vancouver,
BC, Can. Publ by Plenum Press, New York, NY, USA p 183-201.
50) Yu Nai-biao et al. "DEVELOPMENT OF A MULTIFUEL ROTARY COMBUSTION ENGINES."
DONGLI GONGCHENG. Dongli Gongcheng n 5 Oct 15 1987 p 51-56.
51) King, Steven R. "DURABILITY OF NATURAL GAS FUELED ROTARY ENGINES."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAE, Warrendale,
PA, USA Pap 870448, lOp.
52) Lee, C. M. et al. "ESTIMATION OF INSTANTANEOUS HEAT TRANSFER COEFFICIENTS
FOR A DIRECT-INJECTION STRATIFIED-CHARGE ROTARY ENGINE."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAE, Warrendale,
PA, USA Pap 870444, 9p.
53) Dimpelfeld, Philip et al. "HEAT RELEASE CHARACTERISTICS OF
STRATIFIED-CHARGE ROTARY ENGINES."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAB, Warrendale,
PA, USA Pap 870443, llp.
54) Orlandea, N. V. et al. "COMPUTER SIMULATION OF THE ROTARY ENGINE APEX SEAL
SYSTEM."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAE, Warrendale,
PA, USA Pap 870410, 15 p.
55) Grasso, F. et al. "THREE-DIMENSIONAL COMPUTATIONS OF FLOWS IN A
STRATIFIED-CHARGE ROTARY ENGINE."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAB, Warrendale,
PA, USA Pap 870409, 67p.
56) Shih, T. I. -P. et al. "FUEL-AIR MIXING AND COMBUSTION IN A
TWO-DIMENSIONAL WANKEL ENGINE."
Papers Presented at the SAB International Congress and Exposition.,
Detroit, MI, USA. SAB Technical Paper Series Publ by SAE, Warrendale,
PA, USA Pap 870408, 29p.
57) Maiti, R. et al. "KINEMATICS OF ACTIVE CONTACT IN MODIFIED EPITROCHOID
GENERATED ROTARY PISTON MACHINES."
MECHANISM & MACHINE THEORY. Mech Mach Theory v 23 n 1 1988 p 39-45.
58) Nguyen, H. L. et al. "PERFORMANCE AND EFFICIENCY EVALUATION AND HEAT
RELEASE STUDY OF AN OUTBOARD MARINE CORPORATION ROTARY COMBUSTION
ENGINE."
NASA TECHNICAL MEMORANDUM. NASA Tech Memo 89833 1987 22p.
59) Tatsutomi, Y. et al. "ROTARY ENGINE TECHNOLOGIES - PRESENT AND FUTURE."
INTERNATIONAL JOURNAL OF VEHICLE DESIGN. Int J Veh Des v 8 n 2 1987 p
192-204.
60) Jones, Charles "ROTARY ENGINE AIMS TO SCORE GOALS THIS DECADE."
CME, CHARTERED MECHANICAL ENGINEER. CME Chart Mech Eng v 34 n 4 Apr 1987
p 46-50.
61) Williams Douglas "DEERE'S ROTARY SPINS TOWARD PRODUCTION."
AUTOMOTIVE INDUSTRIES. Automot Ind v 166 n 11 Nov 1986 p 88-89, 91.
62) Shih, T. I-P. et al. "FLUID FLOW AND FUEL-AIR MIXING IN A MOTORED
TWO-DIMENSIONAL WANKEL ROTARY ENGINE."
AIAA/ASME/SAB/ASEE 22nd Joint Propulsion Conference., Huntsville, AL
USA. AIAA Paper Publ by AIAA, New York, NY, USA Pap AIAA-86-1556, lop.
63) Pelekis, E. et al. "NEW SIMPLE ROTATORY MOTION INTERNAL COMBUSTION ENGINE
OF HIGH EFFICIENCY AND LOW MANUFACTURING COST."
Energy Conservation in Industry, Proceedings of the International
Seminar. Volume 2: Engines and Batteries., Duesseldorf, West Ger.
Commission of the European Communities, (Report) EUR 9236 v 2. Publ by
VDI Verlag, Duesseldorf, West Ger p 116-124.
64) Matsuura, Kenji et al. "RETARDED PRESSURE BUILDUP BEHIND A ROTARY ENGINE
APEX SEAL."
BULLETIN OF THE JSME. Bull JSME v 29 n 254 Aug 1986 p 2585-2591.
65) Goddard, D. et al. "ADVANCED ROTARY ENGINE COMPONENTS UTILIZING FIBER
REINFORCED Mg CASTING."
AIAA/ASME/SAB/ASEE 22nd Joint Propulsion Conference., Huntsville, AL,
USA. AIAA Paper Publ by AIAA, New York, NY, USA AIAA-86-1559, 7p.
66) Mount, R. E. et al. "HIGH PERFORMANCE, STRATIFIED CHARGE ROTARY ENGINES
FOR GENERAL AVIATION."
AIAA/ASME/SAE/ASEE 22nd Joint Propulsion Conference., Huntsville, AL,
USA. AIAA Paper Publ by AIAA, New York, NY, USA AIAA-86-1553, 12p.
67) Kamo, R. et al. "ADIABATIC WANKEL TYPE ROTARY ENGINE."
Adiabatic Engine: Global Developments., Detroit, MI, USA. SAE Special
Publications SP-650. Publ by SAB, Warrendale, PA, USA p 201-212.
68) DeMeis, Richard "ROTARY GROWS UP."
ABROSPACE AMERICA. Aerosp Am v 24 n 6 Jun 1986 p 48-51.
69) Kamo, R. et al. "ADIABATIC WANKEL TYPE ROTARY ENGINE."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860616, 14p.
70) Lychuk, W. M. et al. "STRESS AND DEFORMATION MODELING OF MULTIPLE ROTARY
COMBUSTION ENGINE TROCHOID HOUSINGS."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860614, lOp.
71) Roberts, J. A. et al. "COMPUTER MODELS FOR EVALUATING PREMIXED AND DISC
WANKEL ENGINE PERFORMANCE."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860613, 17p.
72) Goddard, David M. et al. "GRAPHITE/MAGNESIUM COMPOSITES FOR ADVANCED
LIGHTWEIGHT ROTARY ENGINES."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860564, 9p.
73) Chen, T. N. et al. "DETONATION CHARACTERISTICS OF INDUSTRIAL NATURAL GAS
ROTARY ENGINES."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860563, lip.
74) Kulina, Mark R. "EXPERIMENTAL EVALUATION OF ROTARY ENGINE TIMING GEAR
LOADS."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAE,
Warrendale, PA, USA Pap 860562, 9p.
75) Dopkin, Joseph A. "ROTARY ENGINE TIMING GEAR LOAD MEASUREMENTS."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860561, 9p.
76) Muroki, Takumi et al. "MATERIAL TECHNOLOGY DEVELOPMENT APPLIED TO ROTARY
ENGINE AT MAZDA."
International Congress and Exposition - Society of Automotive
Engineers., Detroit, MI, USA. SAB Technical Paper Series Publ by SAB,
Warrendale, PA, USA Pap 860560, 9p.
77) Shidahara, Yasuhiro et al. "DEVELOPMENT OF SLIDING SURFACE MATERIAL FOR
COMBUSTION CHAMBER FOR HIGH-OUTPUT ROTARY ENGINE."
Motor Vehicle Technology: Mobility for Prosperity, Third International
Pacific Conference on Automotive Engineering., Jakarta, Indones.
Proceedings - Society of Automotive Engineers P-169. Publ by SAB,
Warrendale, PA, USA p 11-18.
78) Bunting, B. G. "DEVELOPMENT OF AN ELECTRONIC CONTROL FOR A ROTARY FUEL
PUMP."
Electronics and the Diesel Engine. Presented at the 1984 ASME Diesel and
Gas Engine Power Division Technical Conference., Boulder, CO. USA. Publ
by ASME, New York, NY, USA p 19-25.
79) Ohzeki, H. et al. "PRESENT AND FUTURE OF ROTARY ENGINE TECHNOLOGY."
INTERNATIONAL JOURNAL OF VEHICLE DESIGN. Int J Veh Des v 4 n 6 Nov 1983
p 571-586.
80) Jones, Charles et al. "DESIGN OF A HIGH-PERFORMANCE ROTARY
STRATIFIED-CHARGE RESEARCH AIRCRAFT ENGINE."
AIAA/SAB/ASME 20th Joint Propulsion Conference., Cincinnati, OH, USA.
AIAA Paper Publ by AIAA, New York, NY, USA AIAA-84-1395, llp.
81) Muroki, Takumi "RECENT TECHNOLOGY DEVELOPMENT OF HIGH-POWERED ROTARY
ENGINE AT MAZDA."
West Coast International Meeting & Exposition - Society of Automotive
Engineers., San Diego, CA, USA. SAB Technical Paper Series Publ by SAE,
Warrendale, PA, USA 841017, lOp.
82) Knoll, J. et al. "DYNAMIC ANALYSIS OF ROTARY COMBUSTION ENGINE SEALS."
NASA TECHNICAL MEMORANDUM. NASA Tech Memo TM-83536 1984 isp.
83) Sierens, R. et al. "COMBUSTION STUDIES IN A ROTARY ENGINE."
International Conference on Combustion in Engineering., Oxford, Engi. I
Mech E Conference Publications (Institution of Mechanical Engineers)
1983-3 v 2. Publ by Mechanical Engineering Publ Ltd, Bury St. Edmunds,
Suffolk, Engl for Inst of Mechanical Engineers. p 31-4.
84) Meng, P. R. et al. "PRELIMINARY RESULTS ON PERFORMANCE TESTING OF A
TURBOCHARGED ROTARY COMBUSTION ENGINE."
International Congress & Exposition (SAB)., Detroit, Mich, USA. SAE
Preprints (Society of Automotive Engineers) Publ by SAE, Warrendale, Pa,
USA 8203S4, 12p.
85) Jones, Charles "UPDATE OF APPLICABLE AUTOMOTIVE ENGINE ROTARY STRATIFIED
CHARGE DEVELOPMENTS."
International Congress & Exposition (SAB)., Detroit, Mich, USA. SAE
Preprints (Society of Automotive Engineers) Publ by SAB, Warrendale, Pa,
USA 820347, 22p.
86) Willis, Edward A. "DEVELOPMENT POTENTIAL OF INTERMITTENT COMBUSTION (I. C.
AIRCRAFT ENGINES FOR COMMUTER TRANSPORT APPLICATIONS."
NASA TECHNICAL MEMORANDUM. NASA Tech Memo 82869 May 1982 30p.
87) Willis, Edward A. et al. "OVERVIEW OF GENERAL AVIATION PROPULSION RESEARCH
PROGRAMS AT NASA- LEWIS RESEARCH CENTER."
SAB PREPRINTS. SAB Prepr n 810624 for Meet Apr 7-10 1981 19 p.
88) Tompkins, Robert M. et al. "INITIAL TEST RESULTS FOR THE REl-il ROTARY
EXPANDER ENGINE."
PROCEEDINGS OF THE INTERSOCIETY ENERGY CONVERSION ENGINEERING
CONFERENCE. Proc Intersoc Energy Convers Eng Conf lSth, Energy to the
21st Century, v 1, Seattle, Wash, Aug 18-22 1980. Publ by AIAA, New
York, NY, 1980 Pap 809131, p 686-690.
89) Shimamura, Kenji et al. "FUEL ECONOMY IMPROVEMENT OF ROTARY ENGINE BY
USING CATALYST SYSTEM."
SAB PREPRINTS. SAB Prepr n 810277 for Meet Feb 23-27 1981 11 p.
90) Schock, H. J. et al. "EXPERIMENTAL ANALYSIS OF IMEP IN A ROTARY COMBUSTION
ENGINE."
SAB PREPRINTS. SAB Prepr n 810150 for Meet Feb 23-27 1981 16 p.
91) Stradomskiy, M. V. et al. "HEAT TRANSFER IN CHAMBERS OF ROTARY
INTERNAL-COMBUSTION ENGINES."
HEAT TRANSFER - SOVIET RESEARCH. Heat Transfer Soy Res v 12 n 5 Sep-Oct
1980 p 101-105.
92) Adam, Andrei "SYVARO'S SP-440, AIR COOLED, ROTARY-TROCHOIDAL ENGINE."
SAB PREPRINTS. SAB Prepr n 800974 for Meet Sep 8-11 1980 17 p.
93) Meunier, Robert et al. "ROTARY EXPANDER ENGINE PROGRAM."
PROCEEDINGS OF THE INTERSOCIETY ENERGY CONVERSION ENGINEERING
CONFERENCE. Proc Intersoc Energy Convers Eng Conf 14th, v 1, Boston,
Mass, Aug 5-10 1979. Publ by Am Chem Soc, Washington, DC, 1979. Also
available from IEEE (Cat n 79CH1477-9 ENERGY), Piscataway, NJ p
1049-1054.
94) Tatsutomi, Y. et al. "DEVELOPMENT STATUS ON FUEL ECONOMY OF THE ROTARY
ENGINE AT TOYO KOGYO."
INSTITUTION OF MECHANICAL ENGINEERS, CONFERENCE PUBLICATIONS. I Mech E
Conf Publ n 1979-13, Passenger Car Power Plant of the Future, Pap,
London, Engl, Oct 2-4 1979. Publ by Mech Eng Publ Ltd for Inst of Mech
Eng, London, Engl, 1979 p 43-52.
9S) Bayer, Robert J. et al. "ROTARY COMBUSTION ENGINE HYDROCARBON SOURCE
STUDIES."
ANNUAL PROCEEDINGS - RELIABILITY PHYSICS (SYMPOSIUM). Combust Inst. Cent
States Sect, Spring Tech Meet, Tech Pap, West Lafayette, Indiana, Apr
3-5 1978 Sponsored by the Combust Inst, Cent States Sect 41 p.
96) Kohno, Toshiyuki et al. "ROTARY ENGINE'S LIGHT-LOAD COMBUSTION IMPROVED."
AUTOMOTIVE ENGINEERING (WARRENDALE, PENNSYLVANIA). Automot Eng
(Warrendale Pa) v 87 n 8 Aug 1979 p 33-38.
97) Nardelli, R. J. "INDUSTRIAL ROTARY ENGINE OFFERS SIGNIFICANT ADVANTAGES."
PIPELINE AND GAS JOURNAL. Pipeline Gas J v 205 n 8 Jul 1978 p 42, 44-45,
48.
98) Bick, D. E. "ROTARY ENGINES EM DASH SOME DESIGN LESSONS FROM THE PAST."
CHARTERED MECHANICAL ENGINEER. Chart Mech Eng v 25 n 6 Jun 1978 p 82-83.
99) Burley, Harvey A. et al. "SOURCES OF HYDROCARBON EMISSIONS IN ROTARY
ENGINES."
SAB PREPRINTS. SAB Prepr n 780419 for Meet Feb 27-Mar 3 1978 20 p.
100) Yamamoto, Kenichi et al. "DEVELOPMENT ON EXHAUST EMISSIONS AND FUEL
ECONOMY OF THE ROTARY ENGINE AT TOYO KOGYO."
SAB PREPRINTS. SAB Prepr n 780417 for Meet Feb 27-Mar 3 1978 22 p.
101) Leucht, Philip M. "ROTARY ENGINE EXPERIMENTAL MEASUREMENTS USING
TELEMETRY."
LUBRICATION ENGINEERING. Lubr Eng v 34 n 2 Feb 1978 p 85-93.
102) Blair, G. P. et al. "UNSTEADY GAS FLOW BEHAVIOUR IN A CHARGE COOLED
ROTARY PISTON ENGINE."
SAB PREPRINTS. SAB Prepr n 770763 for Meet, Sep 12-15 1977 24 p.
103) Kumar, M. L. et al. "IMPROVED ROTARY MECHANISM ENGINE."
DEFENCE SCIENCE JOURNAL. Def Sci J v 27 n 1 Jan 1977 p 43-S2.
104) Kamiya, Shigeyasu et al. "SUZUKI PRODUCTION ROTARY ENGINE, MODEL RE-S FOR
POWERING MOTORCYCLES."
SAB PREPRINTS. SAB Prepr n 770190 for Meet, Feb 28-Mar 4 1977 18 p.
105) Matsuura, Kenji et al. "RELATIVE BEHAVIOR OF A ROTARY ENGINE APEX SEAL TO
THE WALLS OF A SLOT."
BULLETIN OF THE JSME. Bull JSME v 19 n 137 Nov 1976 p 1367-1375.
106) Leucht, Philip M. "ROTARY ENGINE EXPERIMENTAL MEASUREMENTS USING
TELEMETRY."
PREPRINTS - TRIBOLOGY CONFERENCE. ASLE Prepr 31st Annu Meet,
Philadelphia, Pa, May 10-13 1976 Pap 76-AM-5B-4, 9 p.
107) Chicurel, Ricardo "DEVELOPMENT OF A NOVEL ROTARY ENGINE."
NTC CONFERENCE RECORD - NATIONAL TELECOMMUNICATIONS CONFERENCE.
Intersoc Energy Convers Eng Conf, 11th, Proc, State Line, Nev, Sep
12-17 1976 Publ by AIChE, New York, NY, 1976 v 1 SAE Pap 769014 p
73-79.
108) Lehmann, Edward J. (Ed. ) "AUTOMOBILE AIR POLLUTION, PART 4. NEW
AUTOMOTIVE ENGINES AND ENGINE IMPROVEMENTS: CITATIONS FROM THE NTIS
DATA BASE."
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (PAPER). NTlSearch
NTIS/PS-76/0187/5E15, Search period covered 1970-Feb 1976. Publ by Natl
Tech Inf Serv, Springfield, Va, Mar 1976, 111 p. Available from Eng
Index, New York, NY or NTIS.
109) Reitz, R. D. et al. "STUDIES TOWARD OPTIMAL CHARGE STRATIFICATION IN A
ROTARY ENGINE."
COMBUSTION SCIENCE AND TECHNOLOGY. Combust Sci Technol v 12 n 1-2-3
1976 p 63-74.
110) Loyd, Robert "CURTISS-WRIGHT STRATIFIED CHARGE ROTARY ENGINE
DEVELOPMENT."
COMBUSTION SCIENCE AND TECHNOLOGY. Combust Sci Technol v 12 n 1-2-3
1976 p 47-61.
111) Anon "JUST ANOTHER ROTARY?"
ENGINEERING (LONDON). Engineering (Lond) v 21S n 7 Jul 1975 p S84-S86.
112) Robinson, F. J. et al. "ANALYSIS OF EPITROCHOIDAL PROFILES WITH CONSTANT
DIFFERENCE MODIFICATION SUITABLE FOR ROTARY EXPANDERS AND PUMPS."
JOURNAL OF ENGINEERING FOR INDUSTRY, TRANSACTIONS OF THE ASME. J Eng
Ind Trans ASME v 98 Ser B n 1 Feb 1976 p 161-16S.
113) Robinson, F. J. et al. "ANALYSIS OF EPITROCHOIDAL PROFILES WITH CONSTANT
DIFFERENCE MODIFICATION SUITABLE FOR ROTARY EXPANDERS AND PUMPS."
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (PAPER). ASME Pap n
75-WA/DE-lo for Meet Nov 30-Dec 5 1975, 5 p.
114) Atesmen, k. M. "HEAT TRANSFER IN ROTARY COMBUSTION ENGINES."
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (PAPER). ASME Pap n 75-HT-FF
1975, 6 p.
115) McCuiston, F. D. Jr. "ANALYTICAL EVALUATION OF THE EFFECT OF LEAKAGE ON
NO EMIS IONS FROM A ROTARY ENGINE."
SAB PREPRINTS. SAB Prepr n 750023 for Meet Feb 24-28 1975, 6 p.
116) Atesmen, K. M. "HEAT TRANSFER IN ROTARY COMBUSTION ENGINES."
JOURNAL OF HEAT TRANSFER, TRANSACTIONS ASME. J Heat Transfer Trans ASME
v 97 Ser C n 2 May 1975 p 288-293.
117) Miglin, J. et al. "DEVELOPMENT OF TROCHOID COATINGS FOR THE
CURTISS-WRIGHT ROTARY ENGINE."
MCIC REPORT (METALS AND CERAMICS INFORMATION CENTER). MCIC Rep
MCIC-74-17, Apr 1974, for Meet, Battelle Columbus Lab, Ohio, Nov 14-15
1973, p 1-12. Available from NTIS (AD-779-152K), Springfield, Va.
118) Hacha, T. H. "APEX SEAL WEAR IN A MAZDA ROTARY ENGINE EM DASH EFFECTS OF
FUEL AND LUBRICANT PROPERTIES UTILIZING RADIOISOTOPE TEST TECHNIQUES."
SAB PREPRINTS. SAB Prepr n 741067 for Meet Oct 21-25 1974, 10 p.
119) Mayer, William J. et al. "RADIOMETRIC METHOD FOR APEX SEAL WEAR
MEASUREMENTS IN ROTARY ENGINES."
SAB PREPRINTS. SAB Prepr n 741066 for Meet Oct 21-25 1974, 8 p.
120) Lamping, H. D. et al. "ROTARY COMBUSTION ENGINE TROCHOID COATINGS AND
SEALS."
SAB PREPRINTS. SAB Prepr n 741043 for Meet Oct 21-25 1974, 18 p.
121) Anon "MULTI-FUELED ROTARY PISTON ENGINE DEVELOPED."
OCEAN INDUSTRY. Ocean Ind v 9 n 6 Jun 1974 p 87-89.
122) Girardi, Vincent J. et al. "BROACHING THE EPITROCHOIDAL FORM."
TECHNICAL PAPER - SOCIETY OF MANUFACTURING ENGINEERS. SME Tech Pap n
MM73-657 for Meet Nov 14-15 1973, 18 p.
123) Ellis, John "EPITROCHOID LININGS AND SEALS."
TECHNICAL PAPER - SOCIETY OF MANUFACTURING ENGINEERS. SME Tech Pap n
MM73-652 for Meet Nov 14-15 1973, 19 p.
124) Bauer, A. F. "TRANSPLANT COAT IN ROTARY ENGINES."
TECHNICAL PAPER - SOCIETY OF MANUFACTURING ENGINEERS. SME Tech Pap n
MM73-651 for Meet Nov 14-15 1973, 17 p.
125) Jones, Charles "DEVELOPMENT OF THE ROTARY ENGINE."
TECHNICAL PAPER - SOCIETY OF MANUFACTURING ENGINEERS. SME Tech Pap n
MM73-650 for Meet Nov 14-15 1973, 30 p.
126) Rodgers, J. J. et al. "ROTARY ENGINE TEST TO EVALUATE LUBRICANTS FOR
CONTROL OF ROTOR DEPOSITS."
SAB PREPRINTS. SAB Prepr n 740159 for Meet Feb 25-Mar 1 1974, 12 p.
127) Hartley, John "ROTARY ENGINE MANUFACTURE."
ENGINEERING MATERIALS AND DESIGN. Eng Mater Des v 18 n 5 Jun 1974 p
21-23.
128) Pedersen, Harry "GRINDING THE ROTARY ENGINE TROCHOIDAL BORE."
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (PAPER). ASME Pap n 74-DE-ll
for Meet Apr 1-4 1974, 7 p.
129) Kobayashi, Akira "VANE-MOTOR WITH RHOMBIC LINK DRIVE."
BULLETIN OF THE JSME. Bull JSME v 16 n 101 Nov 1973 p 1693-1701.
130) Statkus, F. D. et al. "DESIGN, CALCULATIONS, AND TESTING OF A NEW ROTARY
INTERNAL COMBUSTION ENGINE."
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (PAPER). ASME Pap n
73-WA/DE-21 for Meet Nov 11-15 1973 9 p.
131) Anon "KAROL ROTARY ENGINE UNDERGOING U. K. DEVELOPMENT."
MOTOR SHIP. Mot Ship v 54 n 639 Oct 1973 p 343.
132) Edwards, Geoff (Ed. ) "ROTARY ENGINE BIDS TO CHALLENGE PISTON POWER."
DESIGN ENGINEERING (LONDON). Des Eng (London) Mar 1973 p 41-44.
133) Russell, J. A. et al. "AIR-COOLED ROTARY ENGINES - A FUELS AND LUBRICANTS
STUDY."
SAB PREPRINTS. SAE Prepr n 730046 for Meet Jan 8-12 1973 8 p.
134) Prasse, H. F. et al. "CRITICAL ANALYSIS OF THE ROTARY ENGINE SEALING
PROBLEM."
SAB PREPRINTS. SAB Prepr n 730118 for Meet Jan 8-12 1973 16 p.
135) Clarke, J. M. et al. "NEW CLASS OF ROTARY PISTON MACHINE SUITABLE FOR
COMPRESSORS, PUMPS AND INTERNAL COMBUSTION ENGINES."
JOURNAL OF POLYMER SCIENCE, MACROMOLECULAR REVIEWS. Inst Mech Eng
(London), Proc v 186 Pap n 62 for Meet Oct 18 1972 p 743-753.
136) Ward, Harry M. III et al. "OUTBOARD MARINE CORP'S PRODUCTION ROTARY
COMBUSTION SNOWMOBILE ENGINE."
SAB PREPRINTS. SAB Prepr n 730119 for Meet Jan 8-12 1973 13 p.
137) Behling, R. D. et al. "LUBRICANT AND FUEL REQUIREMENTS AND GENERAL
PERFORMANCE DATA OF WANKEL ROTARY PISTON ENGINES."
SAB PREPRINTS. SAB Prepr n 730048 for Meet Jan 8-12 1973 11 p.
138) Eberle, Meinrad K. et al. "EVALUATION OF THE POTENTIAL PERFORMANCE GAIN
FROM LEAKAGE REDUCTION IN ROTARY ENGINES."
SAB PREPRINTS. SAB Prepr n 730117 for Meet Jan 8-12 1973 8 p.
139) Yamamoto, K. et al. "COMBUSTION CHARACTERISTICS ON ROTARY ENGINES."
MEDICAL AND BIOLOGICAL ENGINEERING. SAB Pap n 720357 for Meet Apr 5
1972, 8 p.
140) Yamaoka, Jokiro et al. "IMPROVEMENTS OF THE ROTARY ENGINE WITH A CHARGE
COOLED ROTOR."
TELECOMMUNICATIONS AND RADIO ENGINEERING (ENGLISH TRANSLATION OF
ELEKTROSVYAZ AND RADIOTEKHNIKA). SAB Pap 720466 for meet May 22-26
1972, 20 p.
141) FELLER F "2- stage rotary engine. A new concept in diesel power"
J Automot Eng v 2 n 1 Jan 1971 p 9-14.
142) JONES C et al. "Curtiss- Wright's development status of the stratified
charge rotating combustion engines"
SAB Pap 710582 for meeting June 7-11 1971, 20 p.
