Subject: latest at freedom motors CW RC-2-60
From: ACRE
Date: 10/20/2004, 11:03 AM


jbeazley wrote:

Hello All;

Anybody know any specifics on the latest news release at:

        http://www.freedom-motors.com/

Cheers
Cary


What ever it is it is probably a lie. Like all the other releases
from
this
company and Moller. I won't believe it even if I see it :)

Paul Lamar

Hi, Paul....I took a look at their website, and noted that they claim
their rotapower engine can run on "any type of fuel", including diesel
fuel, and that only requires "modest changes in the fuel injection
system to run on diesel fuel".  Have you ever seen/heard of anyone
else successfully running a rotary engine on diesel fuel, and second
question is, what might be the advantages/disadvantages of running on
diesel fuel?  (besides the obvious advantages to us "plastic" airplane
builders in that diesel fuel would be freiendly to our composite fuel
tanks, ie no worries about alcohol mixed in the fuel).  I assume that
it would only "run" on diesel fuel, still using spark plugs, not be a
true diesel engine.   Thanks in advance for your response.  Paul
Conner, Mobile, AL


Like everything else they say you must take this with a grain of salt.
As Francois and Mistral is probably finding out it is not as easy as it
looks. Curtiss Wright, John Deere and RPI spent millions developing
the engine to run on diesel fuel.

For example maximum BMEP for the CW RC2-60 engine we were just talking
about is 135 psi at 3500 RPM. BMEP is directly proportional to torque
and HP at that RPM. Namely 210 foot pounds and 140 HP.
The BSFC was slightly under .5.

The same engine running on diesel #2 got a BSFC of .63 and generated 180
foot pounds and 120 HP at 3500 RPM. Best heavy fuel BSFC was .55 with
JP4.  Upwards of 3500 RPM the situation gets much worse thereby
sacrificing  the excellent  HP to weight ratio advantages of the rotary
engine. High RPM equals high HP to weight ratio all other things
being equal. A turbo charged version can mitigate this problem
to a certain extent as it does with all diesel engines.

I suspect Wankel Gmbh in Korf Germany got similar results with their
heavy fuel engine.

In any event it requires a very expensive and very high pressure (20,000
PSI and up) direct injection of heavy fuel. In the US, like the hybrid
or diesel car, it probably does not make economic sense. In Europe, were
diesel fuel is given a huge tax break resulting in diesel fuel being
half the cost, ..maybe.

Here is some info from the Norbye book.


Paul Lamar

-Matt Prather wrote:

Is this a wankel diesel?  I guess what I am asking is, 'what is
the ignition source?'

Matt-

Not a real diesel. Spark plugs light the fire.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.