jbeazley wrote:
Hello All;
Anybody know any specifics on the latest news release at:
http://www.freedom-motors.com/
Cheers
Cary
What ever it is it is probably a lie. Like all the other releases from
this
company and Moller. I won't believe it even if I see it :)
Paul Lamar
Hi, Paul....I took a look at their website, and noted that they claim their
rotapower engine can run on "any type of fuel", including diesel fuel, and
that only requires "modest changes in the fuel injection system to run on
diesel fuel". Have you ever seen/heard of anyone else successfully running
a rotary engine on diesel fuel, and second question is, what might be the
advantages/disadvantages of running on diesel fuel? (besides the obvious
advantages to us "plastic" airplane builders in that diesel fuel would be
freiendly to our composite fuel tanks, ie no worries about alcohol mixed in
the fuel). I assume that it would only "run" on diesel fuel, still using
spark plugs, not be a true diesel engine. Thanks in advance for your
response. Paul Conner, Mobile, AL
Like everything else they say you must take this with a grain of salt.
As Francois and Mistral is probably finding out it is not as easy as it looks.
Curtiss Wright, John Deere and RPI spent millions developing
the engine to run on diesel fuel.
For example maximum BMEP for the CW RC2-60 engine we were just talking
about is 135 psi at 3500 RPM. BMEP is directly proportional to torque
and HP at that RPM. Namely 210 foot pounds and 140 HP.
The BSFC was slightly under .5.
The same engine running on diesel #2 got a BSFC of .63 and generated
180 foot pounds and 120 HP at 3500 RPM. Best heavy fuel BSFC was .55 with JP4.
Upwards of 3500 RPM the situation gets much worse thereby sacrificing
the excellent HP to weight ratio advantages of the rotary
engine. High RPM equals high HP to weight ratio all other things
being equal. A turbo charged version can mitigate this problem
to a certain extent as it does with all diesel engines.
I suspect Wankel Gmbh in Korf Germany got similar results with their heavy
fuel engine.
In any event it requires a very expensive and very high pressure (20,000 PSI and up)
direct injection of heavy fuel. In the US, like the hybrid or diesel car, it probably does
not make economic sense. In Europe, were diesel fuel is given a huge tax break
resulting in diesel fuel being half the cost, ..maybe.
Here is some info from the Norbye book.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.