Subject: Curtiss Wright rotary / RPMC
From: ACRE
Date: 10/24/2004, 9:02 AM


Hey Jon, How is it going. Long time no hear from. Is the RX8 helping your Rotary Power
Marine business?

Paul Lamar


Hi Paul,

It's been a while since I've watched the ACRE list. As you know there is a tremendous volume of e-mail, and it became a bit overwhelming so I stopped checking it for a while.

Business is picking up again after a bit of a slow summer. I don't see that the RX-8 has had much of an influence on the marine business yet. Certainly we get asked if we are using the Renesis
engine or the "old" 13B. (The answer, BTW, is that we are using the "old" engine. We have not tested a Renesis engine yet, and based on the published power curves it does not appear that it would be
significantly better in our applications. We are limited to about 6500 RPM unless we want to design and build our own marine drives. The Renesis engine seems to be about equivalent in performance to
the "old" 13B within the 0 - 6500 RPM speed range. We will have to wait until we do some dyno testing on the Renesis to see if it warrants a change.)

I was heartened to read about the 100,000th RX-8. I have seen depressingly few RX-8s on the road here in the NY Metro area. I drive on average 50 miles a day in busy areas, I probably see no more
than two RX-8s in a week. A friend of mine went shopping for a car and bought (leased) an Infinity G35 coupe after the Mazda dealer discouraged her from considering an RX-8: "It doesn't come with a
spare tire." "You can get special tires for the winter, but I wouldn't let my wife drive one in the snow." Not good!

Speaking of dynos... our Superflow SF-901 dyno is now operational and available for engine testing. Anyone interested can contact me for info rates at RPMCinfo@aol.com or at 516-656-5685.

Lastly... my comments about Curtiss Wright are made to try to dispel the conclusion that CW's history illustrates that the engine was a "failure." The real story is more complex. Since I know many
of the people who were directly involved, I should try to gather the "facts" while I still can. I think Norbye's book was the last time there was a summary made of the US rotary engine history. It
would be good to document what has happened since then.

Jon

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.