Paul Carey wrote:
Hi Paul
Received my billet eccentric shaft from New Zealand, and the part
looks
good. You will see the rotor bearing flanks are smaller in that the
10mm of
metal adjacent is missing - like the 12A shafts I believe. This was
done to
lighten the shaft for racing.
Paul Carey,
I checked this against the 12 A e- shaft and the rotor bearings flanks are
very similar.
George ( down under)
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.