Bill Schertz wrote:

Everyone,
I discovered an error in my calculations that I presented at the Rotary

Roundup on Saturday. I have enclosed the revised graphs and sample
calculation as a PDF file that everyone should be able to open.

Thanks to those that questioned my numbers -- the methodology was

correct, but my data entry wasn't so good.

please use the attached figures in liu of the ones in the handout.

Bill Schertz
KIS Cruiser # 4045

Bill will be sending us a complete PDF of his entire  excellent talk

shortly I suspect.

It is a unified cooling theory useful for predicting the specifications of

a complete

water side rotary engine cooling system.

Paul Lamar

Paul,
I follow the maths OK but I am confused on the dT 10 deg-f.
Is that  for every 10 degrees above some standard ( or known)temperature or
do you have to measure the temp before it goes into the block.
Also what is the flow rate of the Mazda 13b water pump.
George (down under)

I'll let Bill answer that.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.