Jerry Hey wrote:

Paul,   an exhaust pipe going straight down from the center of the
tangential muffler would conflict with the rad/oil cooler.  To get
around this the 1.75" x 4" rectangular exhaust pipe can be dog legged
per the attached drawing.  As drawn there are no conflicts with the S
beam motor mounts or with the rad/oil coolers.  If the rad/oil cooler
combo is 21 inches wide, there is 1.5 inches clearance.  In my case the
width is only 18 inches so the clearance is 3.5 inches.    Jerry

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.