Of the pumps listed above, the ones I see come through my shop are
mostly Meziere, and Stewart. I have called Meziere on occasion,
and they are great with technical answers.
As far as the big drag engines, many are now going to forged blocks.
(about $7800. empty) No water jackets.
The nitro burners are so tempremental, that leaving the start with a 30-40
deg. block temp variation means a difference in hp.
The records for top fuel now are: Elapsed Time= 4.44 and 333.4 mph.
Archie
Archie do you have any curves of back pressure verses GPM verses current
drain
for any of these electric pumps?
NEGATIVE, I AM SURE MEZIERE CAN SUPPLY.
(BASED ON THEIR PUMPS).
Do the heads have water jackets? I assume they do as there would be no need
for a pump.
THE NITRO ENGINES USE BILLET HEADS W/NO PASSAGES.
THE WATER COOLED ENGINES, IF USING FACTORY TYPE
ENGINE BLOCKS, HAVE THE BLOCK CAVITIES FILLED TO
A POINT ABOUT 1 to 2" BELOW THE DECK.
THE WATER BELOW THAT LEVEL HARDLY MOVES,
AND THE BLOCK FILLER STABILIZES THE CYLINDERS.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.