Subject: HP required to over come drag in radiators/ Paul' Renoracer
From: ACRE
Date: 11/10/2004, 9:57 AM


George Lendich wrote:


"The velocity of the air through the radiator is under the designer's
control to a large degree, and we can (and should) diffuse the flow
coming into the radiator, not only to regain the static pressure drop
through the radiator but to optimize airspeed through it."


I am not sure what you mean by that Marc. I know what a diffuser is
supposed to
do. Do you mean we can control the air velocity by changing the design
or
the
thickness of the core? Also given a required core volume there are
practical
limitations on its size and thickness due to cowl considerations.

You certainly are limited by the dynamic pressure. There is another
consideration
and that is the porosity of the core. If the porosity is too low a
phenomena
called external diffusion will occur limiting the core air velocity
regardless of
the scoop and duct shape. I think we have a limited ability to change
the
porosity
unless one has enough money to design and build a custom radiator.

The K&M classic bell or trumpet shaped diffuser duct is impractical
for
use under
the cowl due to its required length.

The Kays & London wedge shaped "header" in affect is a diffuser and
is much more suitable to our needs being no longer than the rad.


Paul Lamar


George Lendich wrote:


Paul,
My thoughts in regard to limiting drag, maximizing density and
velocity - is
to first identify the air flow restriction ( through the Radiator) which
ever radiator you plan to use, and place a pressure sensor in the inlet,
with an adjustable pressure release valve to the cowl and exit.
Is that too complex ?
George ( down under)

No but it sounds like a cowl flap :) Which is an excellent idea.

Paul Lamar


Paul,

did you ever think to go for a Flying Wing or BWB design?
There you should have plenty of internal volume for all the diffusers of any
of the schools - K&L, K&M, or whatever you like...

For the size, an aircraft will have to have to be able to carry the weight
of 900 hp or even more the FW/BWB approach should be big enough to be more
efficient than a classic layout (....in this case anything that has separat
wings, fuselage, empenage, cockpit bubble, etc.). Besides once you want to
mix it up with the Unlimited ones you will need some mass to deal with their
wakes!
Except you beat them outright out front :)

For some indepth practical experience on BWB on a small scale (GA aircraft,
not the Monster-airliner-BWB design ideas...) you might want to contact Alan
Shaw at the Atlantica website: mshaw4@cfl.rr.com      ...or check:
http://www.wingco.com/
His program is on the backburner for now, but his knowledge about the matter
is there never the less.
A winning BWB would also further his cause.
He also promoted the Walter-LOM-inverted-6cyl engine for a long time, as the
best available aircraft gasoline engine. Lately he is pushing for the "Cheap
Turbofan" - which still has to be found :))
However they had a prototyp ready to go (with the LOM engine), but they
damaged it on a taxi test flyaway........
Maybe he would be interested to run at least some numbers! If his design
makes sense you might also convince him of the rotary in the process!
Imagine a Twin-engine-direct drive-non ducted fan-pusher-BWB blasting
everyone else on the circuit! Short of beating Burt Rutan into Orbit there
is nothing better to go for :))
Well, actually  ....convincing the Reno-Comittee to allow Rotaries in the
first place would be some goal too.....

Just thinking aloud!

Thomas Jakits

PS: Any news on the V8 powered directdrive pusher Unlimited on your airport?

You can always design a better airplane for liquid cooling.
The P51 is the most famous U.S. example.

The vast majority of the time that is not going to happen.
There is an  exception. Chris Cosman and family are in the process as we speak.
Now I don't know yet what they are planning along cooling lines however.

BTW Chris do you have a web site address for me. I don't think I have it
on the ACRE NL list of links.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.