Kevin & Kim wrote:
Right. Bear with me while I think WAY out of the box... and come up
with a real hybrid. How about this: a compound rotary engine similar
to the old compound steam engines in ships 100 years ago. Here's how
it works (or not). One rotor runs like any, burning gasoline.
However, the exhaust gas is ported through the side and moves into a
second rotor as intake. The second rotor then compresses the exhaust
gasses further, creating more heat. During compression, water mist is
injected into the hot gas, which creates steam, which creates
additional pressure. Then, the exhaust is expelled from the engine.
Something of a Wankel + Watt + Diesel multistage engine.... Anyone try
this before? Or, what's the detail that I'm forgetting that may nix
the whole thing? Kevin in Denver
Not that I know of. Hard to say if any. Sounds plausible. The key with any
steam engine is the condenser.
Engines of this type are known as bottoming cycle engines and are widely
used
in stationary gas turbine electric power plants. Waste heat from the
turbine
is used to
generate steam which drives a steam turbine. They are also highly
efficient
getting as much as 50% of the energy in a pound of fuel. The drawback is
they are bulky and not suite to land mobile applications.
Paul Lamar
Sanderson wrote:
I have thought about a similar setup. That is adding a rotor or two to
the
back of the Mazda and running the exhaust through them. I have seen
drawings of Wankle steam engines and that is where I probably got the
idea.
Extra housing and rotors could probably be made of lightweight aluminum
because the exhaust gas would lose temperature rapidly as it expands
through
the engine. This scheme would also eliminate the need for a muffler.
My thought is that the extra rotor(s) should be of considerably greater
displacement than the main engine. And/or they could be geared to turn
faster. One would also need a new eshaft.
Big downsides are greater weight and a longer engine.
The Tesla turbine has been around a long time but lacks any real study. I
have read that they can produce tremendous torque at low speed and I have
also read that they produce no torque at low speed. I have been wanting
to
build a small one in my shop for a long time. It would be most
interesting
to hook one up to the exhaust of an IC engine and see if I can get any
useful numbers out of it. It is a project that sounds simple but I know
from experience that numerous problems rear their ugly heads during the
implementation of supposedly simple ideas.
Could the work of compression be eliminated if the exhaust and water were
injected into the area of the spark plug hole? This might allow the
expanding steam to produce work without having to first remove power from
the other rotor. It still sounds like a complicated version of achieving
turbo-compounding. Water ain't light, either!
Scott Gettings
mail2web - Check your email from the web at
http://mail2web.com/ .
I think that would be an improvement. Sort of like a compound steam engine.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.