Subject: Watt + Wankel + Diesel
From: ACRE
Date: 11/10/2004, 9:54 AM


Kevin & Kim wrote:

Right.  Bear with me while I think WAY out of the box... and come
up with a real hybrid.
How about this: a compound rotary engine similar to the old
compound steam engines in ships 100 years ago.  Here's how it works
(or not).
One rotor runs like any, burning gasoline.  However, the exhaust
gas is ported through the side and moves into a second rotor as
intake.  The second rotor then compresses the exhaust gasses
further,
creating more heat.  During compression, water mist is injected
into the hot gas, which creates steam, which creates additional
pressure.  Then, the exhaust is expelled from the engine.
Something of a Wankel + Watt + Diesel multistage engine....
Anyone try this before?  Or, what's the detail that I'm forgetting
that may nix the whole thing?
Kevin in Denver

Not that I know of. Hard to say if any. Sounds plausible. The key
with
any steam engine is the condenser.

Engines of this type are known as bottoming cycle engines and are
widely used
in stationary gas turbine electric power plants. Waste heat from the
turbine is used to
generate steam which drives a steam turbine. They are also highly
efficient getting
as much as 50% of the energy in a pound of fuel. The drawback is
they are bulky
and not suite to land mobile applications.

Paul Lamar


         Sears sold a Moped like machine that took the exaust from one
cylinder and fed it
into the second cykinder direct for power recovery, Virg


Virgil N. Salisbury - AMSOIL
www.lubedealer.com/salisbury
Miami ,Fl


The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.