Jerry Hey wrote:

Paul, here are two engine mounts made in the last month.   The one that
is still in the fixture awaiting tig welding is for a Mustang II.  It
has the x brace that eliminates the need for a hard point in bottom
center of the fire wall. It bolts to the firewall at the four corners.
In the other photo, I set a Kiss Cruiser eng. mt on the table for
comparison.  The Kiss engine mt has no x brace as plywood firewall can
be bolted to just about anywhere.  The Kiss engine mount is actually
two separate engine mounts, left and right, until bolted to the
firewall.  It bolts the the firewall in six locations.

Jerry Hey
j-winddesigns@thegrid.net

Thanks for the photo's Jerry. The sig file is good too :)

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.