Doug arrived at Santa Paula about noon yesterday in the C150. As we were having lunch
at Logsden he told me a funny but typical aircraft engine story. I am sure
he can do a much better job than me telling it as soon as he gets back
on line.
He woke up somewhere in the Midwest and started the Continental
O-200. It ran very rough on only three cylinders. Apparently one valve
was stuck open. He was fortunate to find a highly experienced mechanic.
The mechanic was able to get the valve out of the guide and completely into
the cylinder with the piston at bottom dead center. Then using a special tool
and a bore scoop he got the valve stem started into the spark plug hole. Yep the valve
stem fits through the spark plug hole. He then stuffed rope into the
cylinder through the valve stem guide and moved the piston out until it held
the valve in the spark plug hole securely. He then cleaned the valve stem
and reversed the process. This whole procedure saved removing the lower cowl
and a bunch of baffling to remove the entire cylinder and piston and getting
to the valve that way. The guy is obviously a brain surgeon in real life.
I have heard of the rope trick to keep a valve stem in the valve guide
with the spring off but this is first time I have heard of anyone accomplishing
this feat of mechanical magic.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.