Subject: Doug Fir's cross country adventures in a C150.
From: ACRE
Date: 11/13/2004, 12:27 PM


O-200. It ran very rough on only three cylinders. Apparently one valve
was stuck open. He was fortunate to find a highly experienced mechanic.
The mechanic was able to get the valve out of the guide and completely
into
the cylinder with the piston at bottom dead center. Then using a special
tool
and a bore scoop he got the valve stem started into the spark plug hole.
Yep the valve
stem fits through the spark plug hole. He then stuffed rope into the
cylinder through the valve stem guide and moved the piston out until it
held
the valve in the spark plug hole securely. He then cleaned the valve stem
and reversed the process. This whole procedure saved removing the lower
cowl
and a bunch of baffling to remove the entire cylinder and piston and
getting
to the valve that way. The guy is obviously a brain surgeon in real life.

I have heard of the rope trick to keep a valve stem in the valve guide
with the spring off but this is first time I have heard of anyone
accomplishing
this feat of mechanical magic.

Paul Lamar


 That's using the old noodle. And why not do it? At the very worst, things don't work out and you have to pull the head, which is what you'd have to do anyway.

If Doug makes it up to Seattle and needs anything up here, he can just e-mail me.

Brian Trubee

 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.