Jerry Hey wrote:

Paul, the distance the muffler  stands off from the block, measured on
the muffler centerline (closest point),  can vary from about one inch
to  two inches.  Moving the muffler in or out may help resolve some
conflicts.     Also, the exhaust pipe can be turned 90 degrees so the 4
inch flat is perpendicular to the long axis of the muffler.    Jerry

Jerry Hey
j-winddesigns@thegrid.net

Yes I agree but you will play hell coming straight out the bottom with most
motor mounts.

Just to confuse the issue here is a 90 degree rotation transition from fore and aft
to side to side. Probably a little quieter and a little bit less drag.

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.