Subject: Doug Fir's cross country adventures in a C150.
From: ACRE
Date: 11/14/2004, 10:43 AM


O-200. It ran very rough on only three cylinders. Apparently one valve
was stuck open. He was fortunate to find a highly experienced
mechanic.
The mechanic was able to get the valve out of the guide and completely
into
the cylinder with the piston at bottom dead center. Then using a
special
tool
and a bore scoop he got the valve stem started into the spark plug
hole.
Yep the valve
stem fits through the spark plug hole. He then stuffed rope into the
cylinder through the valve stem guide and moved the piston out until
it
held
the valve in the spark plug hole securely. He then cleaned the valve
stem
and reversed the process. This whole procedure saved removing the
lower
cowl
and a bunch of baffling to remove the entire cylinder and piston and
getting
to the valve that way. The guy is obviously a brain surgeon in real
life.

I have heard of the rope trick to keep a valve stem in the valve guide
with the spring off but this is first time I have heard of anyone
accomplishing
this feat of mechanical magic.

Paul Lamar


 That's using the old noodle. And why not do it? At the very worst, things
don't work out and you have to pull the head, which is what you'd have to do
anyway.

If Doug makes it up to Seattle and needs anything up here, he can just
e-mail me.

Brian Trubee

R S Bruner wrote:

Hey Paul and Doug,

That is an old trick that I have used several times in the past. I have been
working on aircraft
For a long time now and I learned it from an AP / IA that is now in his mid
70's.  He did most of his
Work on the old Twin Bo's & Queenairs. If was a quick fix when we had to
turn around a plane going out.
It works well but you have to use a cotton rope because it will not collapse
under pressure of the cylinder coming up
And holding the valve in place.   The fun part come when you have to put the
valve back in place.
Been there done that.  FUN, fun, fun.
Later guys
Ralph in Florida
AP / IA

Heck I think they ought to teach it in A&P school since stuck valves are a way
of life in piston engines :)

Paul Lamar
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.