We sent this out early today but all you people on AOL did not
get it apparently. We got a whole list of AOL bounces.
Paul Lamar
Subject: Info about stock turbo?
Date: Thu, 18 Nov 2004 00:33:05 -0800
From: ACRE <rotaryeng@earthlink.net>
Organization: ACRE
Hello everybody,
I joined a week ago in an effort to learn all I could about a using a mazda 13b on my Osprey 2 project...I feel that I definitely came to the right place! I have a new 89 13b turbo II engine bought
a few years back for another project that I never got around to finishing. I have spoken to Tracy Crook a few times about his PSRU and ECM and believe that is the route I'm going to take. I have a
few questions, I was hoping I might get input on, however. I was not planning on using the turbo (even thought it is new), but I'm concerned about trying to deal with keeping a muffler on the
engine with the extreme exhaust heat. Since the engine is new, I really do not want to tear it apart to replace the low compression rotors, but I need all the power I can get (to get off the
water).
I have heard a turbo acts as a pretty good muffler, but the stock turbo will not work for an aircraft. My question is... will the stock turbo not work at all, or is it just not ideal. I
do not want anything complicated like altitude power compensation. In my application, boost on take off is more important anyway. I'm wondering if the stock turbo would provide reliable exhaust
sound reduction with enough power gain to offset the extra weight, especially since I do not want to switch rotors if I don't use the turbo. Speaking of weight, the turbo, manifold, and intercooler
weigh 33 pounds. What kind of weight would I be looking at for a manifold and muffler?
In short:
Will I a stock turbo work at all? If so what kind of HP could I expect? How much more complicated to tune?
Will I still need a muffler?
How much more weight will the turbo be than a muffler?
Anyway ... sorry this was so long. Any advice would be greatly appreciated.
Thanks
Gregg Miley
The stock turbo works but you have to limit the boost to about 30" Hg
particularly at altitude or it will over speed and destroy itself. You won't see
much more than about 200 HP. A Borg Warner TO4 at about $450 is probably
is a lot more durable but much heavier. You would also need a heavier
exhaust manifold for a TO4.
On the other hand an Osprey is a small airplane designed for a 200 pound, 100 HP
O-200 as I recall so a turbo 13B would be extra heavy. I would go with a
normally aspirated 13B even with low compression rotors. Save weight wherever
possible. Perhaps an inconel muffler.
You could also sell the engine you have and pick up a normally aspirated engine
to get the high compression rotors. Even an RX8 engine is a possibility.
An RX8 engine would not require such a heavy duty muffler due to the side exhaust.
You will still be looking at around 300 pounds for the engine and cooling
system. With peripheral intake ports from Jerry Hey perhaps 220 HP at 7000 RPM.
For some big bucks you can get aluminum end housings from racing beat to
further cut the weight of the engine.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.