Marc de Piolenc wrote:
Sorry, but I don't have a personal email addy for Paul Lamar.
Paul,
I have a very low-res picture of an engine test stand in my archives
which is credited to you. I need to build just such a rig to get
torque curves for the little Suzuki three-bangers sold here, and I
don't want to re-invent the wheel. If I ask REALLY REALLY nicely,
could I have a larger drawing?
Best,
Marc de Piolenc
send me the jpg and I will see if I can dig up an iges
Paul
Marc de Piolenc wrote:
Here's what I have.
Marc
OK that is an ACAD 12 drawing. I'll send an IGES for ACAD 12.
Here are some pictures in the bargain. If I had it to do
over I would move the dyno closer to the ball hitch and get
the wheels just aft of the prop. Right now it requires
too much balance weight.
BTW don't get carried away on generating too much static thrust.
Especially with a Suzuki engine. We had a guy die doing that.
Could not climb out of ground effect and hit a tree.
RPM way past the power peak after he took off.
Paul Lamar
Many thanks for the pix and drawings, and special thanks for the
suggested improvements.
The project that I'm working now, believe it or not, is a hovercraft.
No climbout problem, and cruise speed is so low that the vehicle has
pretty good static thrust even without optimization.
I need the test stand for torque measurements so I can match the lift
fan and propulsion fan to the engine. Unfortunately, the cheap utility
vehicle engines available here are not documented online.
Thanks again!
Marc
A ducted fan would be perfect for a hover craft. Little or no aero drag
on the duct.
Paul Lamar
Exactly - and many hovers have them, though some of them are so
dubiously designed that they are probably little more than propeller
guards in the final analysis. I would actually prefer an open
propeller for this project - less to build - but it looks like there's
a low-hanging obstacle on the river route this thing will be taking,
so a smaller diameter may prove necessary.
Marc
I am surprised that more ducted fans are not used on air boats.
Especially the ones powered by direct drive V8's that have limited
HP at prop RPM limits. Seems like there would be a business opportunity
there where air boats are widely used.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.