> > > Ben Baltrusaitis wrote:
     > > >
     > > > I finally found a 20B for a reasonable price. Came with ECU,
     > transmission, turbos, motor mounts, even a fusebox.
     > > > Anybody need a Cosmo transmission?,,,,,cheap?
     > > >
     > > > I don't plan on using the stock turbos either. If someone

wants them

     > before I put them on eBay, let me know.
     > > >
     > > > Don't they have torques wrenches in Japan? While taking the

manifold off

     > the housings I tried a socket on the nut to see if it would fit

and I turned

     > the thing right off! There was carbon on the
     > > > housings where the exhaust was leaking.
     > > > There were other bolts and nuts that were not torqued

properly, too.

     > > >
     > > > I'm still wondering if I should go with a turbo or not. I'm

leaning more

     > toward a muffler now if I can figure how to fit it under an

Acroduster Too

     > cowling and get 325hp.
     > > > Ben

     Brett & Tiana wrote:
     >
     > Hey Ben,
     >
     > If nobody on this newsletter bites re: the Cosmo transmission,

try

     > advertising it on the RX7 forum at www.rx7club.com There's always

somebody

     > on there looking for drivetrain components that will withstand
     > higher-than-stock engine output, particularly in the 3rd-gen

specific

     > section of the forum--- where the potential customers can

actually afford to

     > pay you a fair price.

Ben Baltrusaitis wrote:

Thanks Brett & Tiana, I will give that site a try. Any idea what I

should ask for the transmission and converter?

Ben

Brett & Tiana wrote:

Not sure what the going rate is for those, Ben. It probably wouldn't hurt to
ask on the forum before advertising yours for sale. Somebody on there is
bound to have already looked into aquiring one and found out a fair market
value.

The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.