A little off the topic here but when it comes to ducts, don't you want
to have as little clearance between the duct and the fan as possible? If
that's the case, why would it not be preferable to have the duct built as
part of the fan? In other words, the duct would just be a ring that is part
of the fan. There must be a practical reason no one is doing it, because
it's so simple and there is no way that someone has not thought of this
first. So does anyone know?
Brian Trubee
Brian,
I mentioned that to someone ( ducted long-ez , was it Perry?) some time ago,
in a private communication.
The boat industry has been doing that for years and the performance is much
improved.
I notice they don't do it on the large boat props for the same reason it
might not be good for aircraft application - centrifugal forces would be
considerable on a duct ring - the bigger the ring the bigger the forces.
I've tried to think of ways to contain those forces but haven't come-up with
anything suitable as yet, mybe someone might think of something ?
Perhaps something like the Fanliner with bearings front and back might help
?
George (down under)
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.