Subject: 87 Rotor vs 89-92 Rotor
From: ACRE
Date: 11/23/2004, 3:10 PM


Fred Osborn wrote:

Can anyone provide me with some assurance that a 89-92 NT rotor
is mechanically interchangeable with an 87 NT rotor. I would like to
use the lighter 89-92 for my single rotor engine because balancing
would be much easier, removing weight from the counterweights as
opposed to adding weights. I think I can live with the higher
compression ratio, 9.7:1 vs 9.4:1.

Also, does anyone have an 89-92 NT rotor they will exchange for $'s

Fred Osborn


Call John at Mazdatrix. He is the most knowledgeable guy I know on
rebuilding
Mazda engines. What works with what.

Paul Lamar

"Brian D. Cain" wrote:

It is not interchageable, Fred.  The weights are different.  It will throw
the crank assembly off-balance.  If you change anything, you must change
it all -> the single rotor with the matching front c/w and rear c/w /
flywheel.

I may have a 89-92 non-turbo rotor for you.  I'll have to check.

B-- 
__________________
Brian D. Cain -/- Grand Prairie, TX -/- bdc196@killspam.comcast.net
bdc@killspam.teamfc3s.org
BDC Motorsports - Performance 13B Engines, Haltech EFI tuning, Etc.
MSN bdc196@killspam.hotmail.com, Yahoo! bdc196, AOL Symajhi, ICQ# 1733105
http://bdc.cyberosity.com -/- http://groups.yahoo.com/group/HaltechSupport
 
The Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2004 All world wide rights reserved.